Maytag mwf4100aws Water System User Manual


 
MAYTAG Whole Home Water Filtration System Owners Manual MA1-5
November 2003
12
67500006 Advanced Controller with batteries
(2AA)
67500011 Cap
67500012 Lockring
67500013 Backpulse Tank
67500014 Base
67500015 Inlet or Outlet Pipe Assembly
(Inlet may also
require solenoid NO)
67500016 Drain Pipe Assembly
67500017 Installation Sub Assembly Kit (inlet,
outlet, drain, air vent)
(Inlet may also
require solenoid NO)
67500018 Solenoid Valve NC (Normally Closed)
67500019 Solenoid Valve NO (Normally Open)
67500020 Hex Elbow, ¾”Mx5/8” Hose Barb
67500021 Air Vent Valve, automatic float, duo
vent
67500009 O-Ring Lube – NSF Certified
67500023 Pressure Test Gauge Assembly
67500024 MAYTAG MC1 Cleaning Solution
(for ground
water only)
Startup of a new MAYTAG Whole Home Water Filtration
System
Once the MAYTAG Services Qualified Service Installer has completed the new System
installation, the owner should thoroughly flush the filtration system before using. Simply open a
nearby water tap and allow to run for about 1 hour. Ensure that the drain is open and unobstructed
and able to accommodate the flow. Do not leave flowing water tap unattended. This will remove
any residual preservative from the new System.
Sanitizing Your Household Distribution System
If your new MAYTAG Whole Home Water Filtration System is being used to filter water from
sources other than a municipal drinking water supply, your household drinking water distribution
system should be sanitized prior to use. Please see your MAYTAG Services Qualified Service
Installer or MAYTAG Customer Care for details.
Maintenance Schedule
All service and maintenance is to be performed by a MAYTAG Services Qualified Service
Technician. An annual integrity test must also be performed by a MAYTAG Services Qualified
Service Technician. This annual test is required as part of the 5 year limited prorated membrane
warranty.
If the MAYTAG Services Qualified Service Technician determines that the System has a high
degree of debris causing a reduction in System flowrate, the number of visits per year may be
increased by MAYTAG to ensure that the System stays within operational limitations set by