Lightolier W7011 Indoor Furnishings User Manual


 
T
INSTRUCTION SHEET NO.
INSTALLATION OF CALCULITE A-LAMP WALL WASHER/DOWNLIGHT REFLECTOR
INSTRUCTION SHEE1’ FOR ITEMS:
V7009. V701O. V7011
IS:V7009
4
I-too
W7009; W701O, W7011
1Uuu
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE.
This fixture is intended for installation in accordance with the Nationai Electrical Code and local or federal code specifications. TO prevent
electrical shock, turn off electricity at fuse box before proceeding,
Retain these instructions for maintenance referance.
LAMPHOLDER SPRING
WALL WASHER
REFLECTUVHOUSING —\
/
~ ADJUSTABLE LAMPHOLDER HOUSING
DOWNLIGHT
MOUNTING FRAME -
= CARDBOARD PAINT SHIELD
FIG. 1
SPRING
BOX
I
WARNING+RISK OF FiRE)DO NOTINSTALL1NSULATIONWITHIN3 lNCHESOF FIXTURESIDESOR
WIRINGCOMPARTMENT,NOR ABOVEFIXTUREIN
SUCH A MANNER SO AS TO ENTRAP HEAT.
1
A. INSTALL INSIDE REFLECTOR (FIG. 1)
NOTE For overlapping trim installation slip on WHITE
TRIM RING over INSIDE REFLECTOR, as shown in Fig.
2 and 3. For flangeless trim installation, WHITE TRIM
RING is not required.
To install INSIDE REFLECTOR in REFLECTOR/
HOUSING with THUMB SCREWS (Fig. 4), push INSIDE
REFLECTOR up into REFLECl_OR/HOUSING. Rotate
INSIDE REFLECTOR so that CUT OUT WINDOW is
always opposite the wall to be lighted. Now, tighten the
THUMBSCREWS so that INSIDE REFLECTOR is held
firmly against ceiling surface.
B. CARE AND MAINTENANCE OF “A12AK”
REFLECTOR
If handling of reflectors with anodized or Alzak finish is
required, the use of clean white or plastic film gloves is
recommended to avoid fingerprints.
Anodized or Alzak surfaces can be cleaned by the
followina methods:
Wipe”of with a soft, clean, dry, lint-free cloth.
Wipe off with a clean cloth dampened in mild
detergent solution. Rinse, then wipe dry with lint-free
cloth or paper towel.
WiDe off with a clean cloth damDened with a
soiution of wetting agent and water (such as 2 oz.
per gallon “Piuronic L62-LF by Wyandotte Products),
or a liquid wax such as Glass Wax”. Then wipe dty.
Avoid gritty cleaning agents.
U.S. Pat. No. 4,039,822
INSIDE
REFLECTOR ~
(2
r
J
WHITE J
TRIM
RING
FIG. 2
FIG. 3
‘HUMBSCREWT rREFLEmOR’HOus’NG
CUT OUT
1
WINDOW
FIG. 4