Filter
Top Products
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • B0605
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Spectral Architectural Lighting SL205C
Page 1 of 2 Floating Paper 7 1/2" Diameter Optic Forms 1-26/32/42W Triple Twin Tube
7 3/4"
(197mm)
9 1/4"
(235mm)
7 1/2"
(191mm)
1 1/8" MAX.
(29mm)
15"
(381mm)
12"
(318mm)
Features
1. Reflector: Specular aluminum, 16 ga.
2. Lens: 1 1/4" (29mm) thick clear acrylic finished with a translucent diffused
coating.
3. Trim Ring: 12 ga. aluminum. Stainless Steel finish.
4. Socket Cup: Heat dissipating die-cast aluminum. Positive locking attach-
ment, without tools, to reflector assures proper optical alignment of lamp.
5. Mounting Frame: Die-cast aluminum suitable for dry ceilings.
6. Retaining Springs: Rust resistant springs simplify reflector/housing remov-
al for inspection and maintenance.
7. Mounting Brackets: 16 ga. steel. Use 18" (457mm) mounting bars (option-
al) or with standard 3/4" (19mm), 1-1/2" (38mm) lathing channels (by others)
or 1/2" (13mm) tubing (by others). Adjust vertically from inside of fixture.
8. Junction Box: 14 ga. steel, 4" (102mm) x 3-1/2" (89mm) x 2" (51mm) box,
allows inspection from below. UL “c/us” listed for through branch circuit wir-
ing with maximum of 8 no. 12, 90o C conductors.
9. Screws: Stainless Steel, Philips head.
Mounting
Recessed, Non-IC Type (non thermal insulation contact).
Luminaire Weight: 6 lbs.
Electrical
Ballast: Electronic Program Rapid Start T4 quad lamp ballast. Universal voltage
“U” ballast automatically detect 120 volts or 277 volts operation. No visible
flicker on starting, internally fused and protection circuit for lamp end of life.
Sound rated “A”. Designed for removal without tools from inside of luminaire
for easy field inspection or service replacement.
TE: 26/32/42W TTT non-dimming
PK: 26/32/42W TTT Powersepc dimming HDF by Lightolier-Controls
TS: 26/32/42W TTT MARK-10 dimming by Advance
Lampholder: GX24q-4 universal base, 4 Pin.
Options and Accessories
Mounting Bars:
1950, set of 2, 18" (457mm) long.
1951, set of 2, 30" (762mm) long.
T-Bar Anchor Clips:
1956, set of 4, for anchoring mounting bars to T-Bar runners.
Labels
UL “c/us” Listed. Suitable for damp locations.
Ordering Guide (2 Part System: Trim and Frame-In-Kit)
Trim Frame-In-Kit Lamp Volt Finish
SL205CFTEU 120/277V
Clear acrylic with White Lacquer lens
SL205CFTE3 347V
and Stainless Steel trim ring
SL205CT SL205CFPKU 1-26/32/42W TTT* 120/277V
SL205CFTS1 120V
SL205CFTS2 277V
12"
(318 mm)
7 3/4"
(197 mm)
7 1/2"
(191 mm)
1 1/8"
(29 mm)
15"
(381 mm)
9 1/4"
(235 mm)
Ceiling Cutout: 8" (203 mm)
*Use 4100°K lamp for optimal white lens rendering.