Filter
Top Products
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
S1 Series Emergency Lighting S1
Page 1 of 1 6 Volt 12 to 19.5 Watts Self-Contained Square
Lightolier is a Philips group brand
The S1 Series is a versatile, self-contained emergency lighting fixture. The S1 can be surface mounted, semi-recessed or fully recessed.
Surface Mount
9.0”
(22.9 cm)
3.8”
(9.7 cm)
1.6”
(4.1 cm)
8.0”
(20.3 cm)
2.1”
(5.3 cm)
9.0”
(22.9 cm)
3.8”
(9.7 cm)
11.6”
(29.5 cm)
12.3”
(31.2 cm)
11.6”
(29.5 cm)
Fully Recessed Mount
Unit Battery Capacity
DC Watts to 87
1
⁄2
Voltage Unit of Rated Voltage*
1
1
⁄2 hrs. 2 hrs. 4 hrs. 8 hrs.
6 S112L 12.0 9.0 —
S112N 12.0 9.0 — —
S126N 26.0 19.5 12.5 —
* Per NEC Specifications
Features
1. Illumination: Illumination is provided by halogen lamps. Plus, the S1 Series
features a highly reflective polished lens for increased illumination. 12w
units are furnished with 12 watt halogen lamp. 26w unit is furnished with 7
watt halogen lamp.
2. Housing: Constructed of impact resistant, UL 94 V-0, 5 VA thermoplastic
frame and backbox. The semi-recessed backbox is constructed of 22 gauge
steel. The frame is matte white with a black backbox. An acrylic lens is
standard. A shatter-resistant polycarbonate lens is available.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect,
AC lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C) to
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-
mated service life of 10 years, and an operating temperature range of 20°F
(-7°C) to 95°F (35°C).
5. Input Power Requirements: 120 VAC - 0.096 amps, 10 watts; 277 VAC -
0.04 amps, 10 watts
Code Compliance
UL 924 listed.
Options
V = Voltmeter
P = Polycarbonate Lens
Accessories
RMP1 = Semi-Recessed Mounting Kit
SERIES BATTERY/ MOUNTING
WATTAGE CONFIGURATION
S = Surface
R = Fully Recessed
2
NOTES
1) Nickel cadmium units are recommended
for recessed applications.
2) For semi-recessed applications, order
the surface mount unit with the RMP1
accessory. Fully recessed units can only be
used on suspended ceilings.
3) DC wattage is determined by master unit.
4) 12V remote units can only be remoted
with 12V single point units.
MASTER UNITS
Lead Calcium
12L = 6V, 12W
Nickel Cadmium
1
12N = 6V, 12W
26N = 6V, 26W
MASTER UNITS
S1 = Self-Contained
Emergency Lighting
REMOTE UNITS
3
S1R6 = 6V
S1R12 = 12V
4
Complete Fixture consists of unit and lamps. Select options and accessories below.
How to Specify:
NOTE: IES Photometrics are
not available for S1 Series.