Filter
Top Products
9-5/16"
A-21
8-1/4"
A-19
5-7/8" Dia.
Flush
6-1/2"
Overlap
7-1/4"
2
8
1
4
5
6
37
3/4" max.
Ceiling Thickness
3"
1" min.-
2 " max.
(Ceiling Runner)
12-1/2"
4-1/2"
13-1/4"
10-1/4"
Molded
Trim Ring
Flush Trim
(Molded Trim
Ring Removed)
Overlap Self-Flange
Matte White
or Polished
Top View
Calculite
®
Incandescent Open Wall Washer R7029
Page 1 of 2 6" Aperture A19 / A21
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Socket Cup: Die-cast aluminum cup effectively dissipates heat and assures
lamps maintain proper optical alignment to reflector. Snaps onto reflector
neck for easy tool-less installation. Can be adjusted without tools from
inside or outside of fixture to accommodate two different lamp sizes.
Contains medium base porcelain socket with nickel plated screw shell wired
with No. 18 SF1 leads to J-Box.
2. Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga.
steel construction. Use with standard 3/4” or 1 1/2” lathing channels, or
1/2”(11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.
3. Retaining Springs: Precision-tooled springs secure reflector housing to
mounting frame for quick tool-less installation.
4. Insert Reflector: Alzak
®
aluminum, 16 ga., “cut-window” reflector allows
light to pass to a separately contoured outer housing reflector. 50° visual
cut-off to lamp and lamp image. Insert reflector contours provide even down-
lighting. Direction of wall wash can be re-oriented after installation.
Attaches with screws for simple installation and maintenance. Reflector sup-
plied with white molded trim ring (field paintable); or self-flanged reflector,
matte white flange or flange finish to match reflector.
5. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box allows inspection from
below.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
7. Mounting Frame: Die-cast aluminum suitable for dry or plaster ceilings.
Provides flangeless trim in plaster ceiling.
8. Wall Wash Reflector/Housing: Specular clear or gold 16 ga. Alzak
®
alu-
minum to match insert reflector. Attaches to mounting frame with springs.
Detachable for inspection from below fixture. Reflector provides even wall
wash. Must be installed before ceiling is finished.
Other Reflector Finish Options
Consult Factory
Ceiling Cutout: 6 9/16" Dia.
Reflector Trims Frame-In Kits Lamp
White Polished Flush/White
Finish Self-Flange Self-Flange Molded Trim Ring
Wall Washer Specular Clear R7029CLW R7029CLP R7029CL R601 Clear A19 100W
Specular Gold S7029GDW S7029GDP S7029GD S602 Gold A21 150W
Corner Wall Washer Specular Clear R7030CLW R7030CLP R7030CL R601 Clear A19 100W
Specular Gold S7030GDW S7030GDP S7030GD S602 Gold A21 150W
Double Wall Washer Specular Clear R7031CLW R7031CLP R7031CL R601 Clear A19 100W
Specular Gold S7031GDW S7031GDP S7031GD S602 Gold A21 150W
Options & Accessories
18” Mounting Bars 1950 (Set of 2)
27” Mounting Bars 1951 (Set of 2)
T-Bar Anchor clips 1956 (Set of 4, for 1950 & 1951 bars)
Wood Joist Mounting Bars 7994 (Set of 2)
Existing Ceiling clips 7998 (Set of 2)
Step Down Transformer 7997 (See separate specification sheet)
Chicago Air Plenum LC (add suffix to Frame-in Kit)
Electrical
UL Listed for a maximum of 8 No. 12 75°C through branch circuit conductors, or
60°C supply conductors for end of run.
Labels
UL Listed for damp locations, I.B.E.W.
Alzak
®
is a registered trademark of ALCOA.