Lightolier QVS2GPFOB2FT Indoor Furnishings User Manual


 
ALTER SMARTVISION
2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
2 LAMP, TT5 BI-TUBE, 5 1/2” DEEP
MICROPERFORATED MESH LAMP SHIELD
STATIC
Efficiency 58.5%.
Broadcast 4: Broadcast control requires no programming of
the iGEN ballasts. Dimming message are sent with a global
address from the master Alter Smart Vision luminaire
to up to 3 slaves luminaire with an iGEN address able
ballast (DA). Each ballast receives the same command and
responds unifomity.
Swing down microperforated lamp shield for easy
relamping and maintenance.
Lamp shield specially cut to accomodate Smart
Vision sensor.
Alter soft white film on inside of mesh conceals lamp
image providing balance between reflected and
direct light.
Fully recessed luminaire and lamp compartment.
95% Reflective Alter soft white paint finish.
Specular interior reflector.
One piece body for easy installation.
Easy access to ballast through lamp
compartment.
Fits standard T-Grid ceilings.
Optional acrylic drop-down visual element.
MOUNTING METHODS/FEATURES DIMENSIONS
FIXTURE TYPE
JOB INFORMATION:
VOLTS
L10-80
QVS2GPFOB2FT
Swing down optical system for
easy relamping and maintenance
Microperforated mesh lamp shields
Ceiling compatibility
Suited to standard exposed T-grid
ceilings
Suited to standard exposed Slot T-grid ceilings
2 x 40W
Genlyte Thomas Company
integrated motion and light sensor with
optional dimming infrared remote control