Filter
Top Products
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems PTS6-2
1BHFPG 1FSJNFUFS5SPVHI3FDFTTFE-JHIU51FS/PNJOBM4FDUJPO
$
Quarter Scale
Features
1. Housing: Die-formed 20 gauge pre-painted steel. Integral heavy gauge bulk-
heads support housing and trim, permitting modules to be bolted together in
continuous runs and facilitate suspension.
2. Lamping:
Continuous Rows:
1. Determine run length.
2. Order the appropriate number of MODULES for the complete ROW.
3. Stagger rows must be completed with an adjustable module.
4. Non-stagger rows must be completed with an adjustable module unless row
lengths are in precise 1 foot (30.48cm) intervals.
5. Order one END SET per ROW.
Labels
UL, cUL and IBEW
Ordering Instructions
Individual Fixtures:
1. Order number of MODULES required.
2. Order one END SET per MODULE.
(2-light only)
3. Reflector: Precision die-formed CRS finished in a high reflective baked white
4. Louver: Lift and shift straight blade louver constructed from die-formed alu-
minum and painted to match housing. Louver blades are 1” (2.54cm) high on
1-1/8” (2.86cm) centers. (Optional)
powder coat.
Mounting
“J” Rail is first mounted to the wall and the modules connect to the rail for 1/4”
(0.64cm) wall adjustment. Modules are hung from suspension wires attached to the
fixture bulkheads and the structure above.
Electrical
Electronic Ballast: Programmed start, 3 conductor, 12 gauge wire. Color-coded
quick connectors allow easy connection for modular fixutres. Factory installed
ballast disconnect allows the ballast to be disconnected from and reconnected to
incoming power under load without turning the entire circuit off.
Dimming: Advance Mark X, use Advance compatible two-wire control (no extra
Emergency Battery Pack: 450 Lumens @ 90 minimum.
control lead required).
Cross-sectional two linear T8 fluorescent lamps. Provided by others.
Family Lamps Shielding Voltage
PTS6 2
Length Options
Blank = No Options
A = Adjustable*
AS = Adjustable Staggered*
S = Staggered
X4 = 4 thru wires
X5 = 5 thru wires
A4 = Adjustable 4 thru wires*
A5 = Adjustable 5 thru wires*
S4 = Staggered 4 thru wires
S5 = Staggered 5 thru wires
B4 = Adjustable Staggered 4 thru wires*
B5 = Adjustable Staggered 5 thru wires*
2 = 2 Lamps O = Open
L = Lens
S = Straight
Blade Louver
1 = 120V
2 = 277V
3 = 347V
D1 = 120V Dim.
D2 = 277V Dim.
E1 = 120V Emerg.
E2 = 277V Emerg.
Module Ordering Information
* only available on Two-Foot, Three-Foot and Four-Foot versions. See length variations of adjustable fixtures on page 2.
2 = Two-Foot
3 = Three-Foot
4 = Four-Foot
6 = Six-Foot
8 = Eight-Foot
7"
(17.78cm)
9 3/8" (23.81cm)
5 1/2" (13.97cm)
1
3
4
2