Filter
Top Products
1
2
3
4
5
6
8
11
12
Flanged
Trimless
Top View
8 3/4"
Depth
5" OC
31 3/8" L X 10" W
20" L X 5" W Opening
1 3/4"
5" OC
5" OC
7
9
10
14 3/8"
18 3/8"
34 1/8"
9 3/8"
PB4M167EBL = (Flanged) Black/White
PB4M167EWL = (Flanged) White
PB4M167EBTL = (Trimless) Black
PB4M167EWTL = (Trimless) White
Calculite
®
ProSpec
®
Linear Downlight PB4M1675
Page 1 of 2 4 Light MR 16 Series B
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of one accessory.
Easily installed and removed for lamping with a simple twisting motion.
Constructed of die formed aluminum.
3. Adjustable Ring: Allows 360° horizontal and 45° (on width) and 45° (on
length) vertical adjustment.
4. Tortiontite Spring: For easy installation of aperture frame.
5. Housing: Die-formed 22 ga. steel. Finish: Black
6. Mounting Brackets: Adjustable vertically from outside of housing.
7. Thermal Protector: Meets NEC, UL, and CSA requirements.
8. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250°C Teflon
®
leads.
9. Junction Box: 14 ga. steel, 4” x 3 1/2” x 2” box. Allows inspection from
below.
10. Transformer Housing: Die-formed 18 ga. steel.
11. Lamp and Accessory Support: .032" steel, flared for easy entry of
Media Cartridge.
12. Lamp Guard: Heat-resistant clear glass. Lamp manufacturers’ requirement.
Electrical
Electronic Transformer: Individual for each lamp. Offers reliable operation
and is accessible from below for servicing. 12V Secondary 75VA ea. lamps.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
Ceiling Cutout: 21 1/16" L x 6 3/16" W
Ordering Information: MR 16 Series B
Cat. No. Lamp Ceiling Trim Aperture Finish
PB4M167EBL (4) 75W MR 16* Overlap Black with White Flange
PB4M167EWL (4) 75W MR 16* Overlap White with White Flange
PB4M167EBTL (4) 75W MR 16* Trimless Black
PB4M167EWTL (4) 75W MR 16* Trimless White
Add a “1” for 120v or “2” for 277v at the *50W max.lamping when using accessories
end of the catalog number for voltage
Electrical (continued)
UL /cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90°C.
Finish
All painted finishes are powder coated, baked enamel.
Options & Accessories
Accessories: 2 1/2” dia. series, filters, lenses, screens, and louver (1)
accessories maximum, including lamp cover glass. Lamp cover glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon
®
is a registered trademark of E.I. DuPont.
US Patent Pending.
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage