Filter
Top Products
J
ob Inf
ormation Type:
J
ob Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Company
www
.lightolier
.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
W
e r
eser
ve the right to change details of design, materials and finish.
© 2005 Genlyte Gr
oup LLC • C1105
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die-formed aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily r
emoved.
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on
length) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die-formed 22 ga. steel. Finish: Black
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC and UL requirements.
9. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250°C Teflon
®
leads
10.
Junction Box:
14 ga. steel, 4" x 31/2" x 2" box. Allows inspection fr
om
below.
11.
Lamp and Accessor
y Suppor
t:
.032" steel, flar
ed for easy entr
y of
Media Cartridge.
12.Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
13.
Lamp Guard:
Heat r
esistant clear glass. Lamp manufacturers requirement.
14.Transformer Housing: Die formed 18 ga. steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible from
below for servicing. 12V Secondar
y 75 V
A. each lamp.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL /cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90° C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens, and louvers. (2) acces-
sories maximum, including lamp cover glass. Lamp guard glass may be replaced
with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
1
2
3
4
5
6
7
8
9
1
0
1
1
12,
13
1
4
3
4 1/8"
14 3/8"
9
3/8"
8
3/4"
Depth
3
1 3/8" L X 10" W
5"OC
2
0" L X 5" W Opening
Top View
Flanged
Trimless
1 3/4"
5
"OC
5"OC
1
8 3/8"
Ceiling Cutout: 21 1/16" L x 6 3/16" W
Ordering Information: MR 16 Series A
Cat. No. Lamp Ceiling Trim Aperture Finish
PA4M167EBL (4) 75W MR 16* Overlap Black with White Flange
PA4M167EWL (4) 75W MR 16* Overlap White with White Flange
PA4M167EBTL (4) 75W MR 16* Trimless Black
PA4M167EWTL (4) 75W MR 16* Trimless White
*50W max. lamping when using accessories
Calculite
®
ProSpec
®
Linear Downlight PA4M1675
Page 1 of 2 4 Light MR16 Series A
Teflon
®
is a registered trademark of E.I. DuPont.
US Patent Pending.
PA4M167EBL = (Flanged) Black/White
PA4M167EWL = (Flanged) White
PA4M167EBTL = (Trimless) Black
PA4M167EWTL = (Trimless) White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage