Filter
Top Products
17"
20 1/8"
O.C.
5"
1 3/4"
10" L X 5" W
17 3/8" L X 10" W
8"
13"
Depth
8 3/4"
Top View
5
6
7
8
9
10
11
12 ,13
14
1234
Flanged
Trimless
5"
Ceiling Cutout: 11 1/16" L x 6 3/16" W
Ordering Information: AR 70 Series A
Cat. No. Lamp Ceiling Trim Aperture Finish
PA2A705EBL (2) 50W AR 70 Overlap Black with White Flange
PA2A705EWL (2) 50W AR 70 Overlap White with White Flange
PA2A705EBTL (2) 50W AR 70 Trimless Black
PA2A705EWTL (2) 50W AR 70 Trimless White
PA2A705EBL = (Flanged) Black/White
PA2A705EWL = (Flanged) White
PA2A705EBTL = (Trimless) Black
PA2A705EWTL = (Trimless) White
Calculite
®
ProSpec
®
Linear Downlight PA2A7050
Page 1 of 2 2 Light AR 70 Series A
J
ob Inf
ormation Type:
J
ob Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Company
www
.lightolier
.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
W
e r
eser
ve the right to change details of design, materials and finish.
© 2005 Genlyte Gr
oup LLC • B1105
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of diecast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on
diagonal) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL , and CSA requirements.
9.
Lampholder:
Double contact bayonet base with 250
°
C #18 gauge T
eflon
®
leads.
10.
Junction Box:
14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection fr
om
below.
11.Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Car
tridge.
12.Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
13.Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
14.
T
ransfor
mer Housing:
Die for
med 18 ga. steel.
Electrical
Electr
onicTransformers:
Of
fer reliable operation and are accessible from
below for servicing. 12V Secondary.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens and louvers. (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I B E W
Teflon
®
is a registered trademark of E.I. DuPont.
US Patent Pending
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage