Filter
Top Products
Flanged
Trimless
15 3/8" L X 10" W
7" L X 7" W Opening
Depth
8 3/4"
1 3/4"
5
6
10
11 12
7
1
2
3
4
18 1/8"
16"
8"
13"
8
9
13
Top View
5"
Ceiling Cutout: 8 3/16"L x 8 3/16"W
Ordering Information: AR 111 Series A
Cat. No. Lamp Ceiling Trim Aperture Finish
PA1A117EBL (1) 75W AR 111 Overlap Black with White Flange
PA1A117EWL (1) 75W AR 111 Overlap White with White Flange
PA1A117EBTL (1) 75W AR 111 Trimless Black
PA1A117EWTL (1) 75W AR 111 Trimless White
PA1A117EBL = (Flanged) Black/White PA1A117EBTL = (Trimless) Black
PA1A117EWL = (Flanged) White PA1A117EWTL = (Trimless) White
ProSpec
®
Linear Downlight PA1A1175
Page 1 of 2 1 Light AR 111 Series A
J
ob Inf
ormation Type:
J
ob Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Company
www
.lightolier
.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
W
e r
eser
ve the right to change details of design, materials and finish.
© 2005 Genlyte Gr
oup LLC • B1105
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die-cast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 30° (on width) and 40° (on
length) ver
tical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die-formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL , and CSA requirements.
9.
Junction Box:
14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection fr
om
below.
10.Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Car
tridge.
11.
Lens Retaining Ring:
.093" spring steel r
od. Holds accessories in place.
12.Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
13.
T
ransfor
mer Housing:
Die-for
med 18 ga. steel.
Electrical
Electronic Transformers: Of
fer r
eliable operation and ar
e accessible
from below for servicing. 12V Secondary.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound
when used with dimmers, which may be objectionable in acoustically
critical areas.
UL/cUL listed for through branch circuit wiring with maximum of (8) no. 2 AWG
90° C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 4 3/4" dia. series, filters, lenses, screens and louvers. (2) acces-
sories maximum, including lamp cover glass. Lamp guard glass may be replaced
with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
US Patent Pending.
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage