Filter
Top Products
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
LT Series LED Exit Sign LT
Page 1 of 1 AC Only or Emergency Operation Thermoplastic Housing
Lightolier is a Philips group brand
The LT Series Thermoplastic LED Exit is a compact exit sign that blends with modern interiors with its softly rounded corners and universal mounting configuration.
The LT Series is extremely easy to install, and provides years of low cost, efficient service.
Front View
1.66”
(4.2 cm)
Canopy
7.3”
(18.5 cm)
5.05”
(12.8 cm)
Features
1. Illumination: Illumination is accomplished with long lasting, high output
Light Emitting Diodes (LEDs).
2. Housing: Constructed of impact resistant, UL 94 V-0, 5 VA white ther-
moplastic (black is optional). NFPA-type field selectable chevrons can be
installed/removed from outside the exit housing. Housing design simplifies
installation, and does not require hard wire terminations inside of the exit
housing.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed nickel cadmium battery has an estimated
service life of 10 years, and an operating temperature range of 20°F (-7°C) to
95°F (35°C).
5. Input Power Requirements: AC Only - Red: .89 W; Green: 2.17 W
Emergency Operation - Red: 3.62 W; Green: 2.79 W
Code Compliance
UL 924 listed.
Options
SD = Self-Diagnostics
BZ = DC Buzzer (Emergency operation only)
BF = Buzzer/Flasher (Emergency operation only)
DL = UL Damp Location Listing
ST = Special Input Transformer (Specify voltage & frequency)
FA = 24 VDC Fire Alarm Interface (reg. constant DC voltage)
FL = Flasher (Emergency operation only)
SW = Special Wording/Graphics (Consult factory)
2CKT1 = 120 VAC Two Circuit
2CLT2 = 277 VAC Two Circuit
Options (continued)
DC12 = 12 VDC Remote Emergency Power
TP = Tamperproof Screws (Requires TPTOOL)
VRS = Vandal Resistant Lens
LP = Low Level Matching Thermoplastic Remote Exit
LL = Low Level Institutional Frame Surface Mt. Remote Exit
Multiple option configurations may void UL listing. Consult factory for specifics.
Accessories
SPKIT12WH(BK) = 12” Pendant Kit, White (Black)
WG4 = Wall Mount Exit Wire Guard
WG10 = Side Mount Wire Guard
PCS1 = Polycarbonate Vandal Shield
LT
SERIES BATTERY STENCIL LETTER STENCIL FACE/
FACES COLOR HOUSING COLOR
W = White
B = Black
R = Red
G = Green
1 = Single
2 = Double
U = Universal
N = Nickel Cadmium
A = AC Only
LT = Thermoplastic
LED Exit
Complete Fixture consists of base exit sign. Select options and accessories below.
How to Specify:
.60”
(1.5 cm)
13.75”
(35.0 cm)
9.5”
(24.1 cm)
Side View