Filter
Top Products
Lightolier is a Philips group brand
Lytespan Lighting LLACSW
Page 1 of 2 ColorWash LED Surface Wall-Washer
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • C0708
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
8
13
2
1
5
12
9
6
7
Features
1. Power Control Module: Extruded aluminum. High power factor power
supply unit. Thermally protected, Class 2, short circuit protection. Solid
state controller and driver. Providing power and data to accurately control
LED array. Thermally protected.
2. Synchronizer: Printed circuit board (PCB) mounted. With a sensitive capter
and audible captation fo rthe 4 button controller.
3. 4-Button Controller: 4 button interface allows selection of light show
and variation of intensity. Molded polycarbonate. Digital.
4. DMX Connector: Two RJ45e jacks mounted on printed circuit board (PCB),
for DMX connection and an exit for daisy chain mounting. Uses standard
CAT5 round 8 conductor stranded twisted pair shielded network cables.
5. Pivot w/Lock: Die-cast aluminum. Adjusts the aiming angle up to 120°
with a locking screw, using a 3/16" Allen key tool.
6. LED Optic Housing: Extruded aluminum. Integral heat sink and color
mixing chamber.
7. LED Array: 48 High-power linear lighting emitting diodes (LED) red, green,
blue and amber (RGBA). Thermally protected with color sensor for accurate
color adjustment over life.
8. LED Optics: Asymmetrical MicroBlend technology ensures smooth
washing and color uniformity and minimizes undesirable color fringing.
9. Lens: Tempered glass, fine prisms provide additional mixing at the
aperture and minimizes the appearance of the individul RGBA sources.
10. Wiring: 10 amperes SVT 2 wire cord with grounded plug. 8 feet.
11. ON/Off Switch: Rocker switch to disconnect power to the power supply unit.
12. Splice Door: 18 gauge steel. 7/8" (222.3 mm) K.O. accepts 3/8" low
profile connector for hardwiring in continuous row for flexible conduit.
Two connectors are included in the luminaire.
Features (continued)
13. Mounting Bracket: 14 Gauge steel. Pivots 360° to permit any type of
mounting with aligning features for accurate positioning.
Dimming
Not compatible w/dimmers.
Finish
All painted finishes are baked powder or enamel.
Labels
cULus, Suitable for damp locations.
Catalog No. Finish Specifications Mounting
LLACSWWH
LLACSWBK
LLACSWAL
White
Black
Aluminum
120V - 60Hz Portable luminaire not recommended for grid ceiling only. Designed for other
ceiling types, floor or wall (vertical and horizontal).
5" (129mm)
4-1/2" (114mm)
2-5/8" (65mm)
11
3
19-1/4" (489mm)
21-7/8" (576mm)
10
1-7/8" (46mm)
3-1/8" (80mm)
2" (51mm)
4
Isometric View