Filter
Top Products
45 Industrial Way, Wilmington, MA 01887 (978) 657-7600 • Fax (978) 658-0595
We reserve the right to change details of design, materials and finish. www.lightolier.com
This product may have a mercury containing lamp. Manage in accordance
with Disposal Laws. See: www.lamprecycle.org
Lightolier is a Philips group brand
Lytecel LI / LC
Installation Instructions
Standard or Slot Grid Ceiling Systems
1
ACCESS PLATE
Remove Access Plate by
sliding Access Plate in the
direction of Arrow 1.To re-
move, lift up and slide in
the direction of Arrow 2.
Bend Fixture Tab up out of
body and make ground
and ballast connections.
Bend Fixture Tab back to
original position. Replace
Access Plate by reversing
removal instructions.
CONTINUOUS ROW COUPLER (LC
UNITS ONLY) Remove screw as shown.
Rotate Continuous Row Coupler (both
sides of Fixtures) and secure Fixtures
5
Access
Plate
Access
Plate
Opening
Fixture
Tab
Ground
Screw
Access
Plate
Opening
Tab
1.
2.
Access
Plate
Opening
T-bar
Screw
Hold-down Clip
Continuous
Row Coupler
Fixtures
Continuous
Row
Coupler
Hold-
down Clip
T-bar
Screw
Fixtures
together with Screw.Tighten
all Screws to secure Fixtures
to T-bar with Hold-down Clips.
HOLD-DOWN
CLIPS
(LI UNITS
ONLY) Install
Hold-down
Clips at
beginning
and end
of rows.
4
END TRIM
Install End
Trim at be-
ginning and
end of row.
3
Fixtures
Screw
Hold-
Down Clip
Fixture
Screw
End
Louver
T-bar
(by others)
End Trim (for
beginning and
end of row)
End of Row
Fixture
T-bar
(by others)
Hold-down
Clip
Screw
Coupler is used at end or begin-
ning of row to secure End of Row
Fixture to T-bar (by others)
2
INSTALL FIXTURES onto
T-bars as shown.
T-bar
Fixture