Filter
Top Products
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
IE Series Emergency Lighting IE
Page 1 of 2 6 Volt or 12 Volt, 28 to 180 Watts NEMA-Rated
Lightolier is a Philips group brand
The IE Series is ideal for locations where oil-water-and dust resistant equipment is required. The housing meets NEMA 3, 4x and 12 classifications.
Features
1. Illumination: Illumination is accomplished with lamp heads mounted on
the top of the unit. The NEMA-rated lamp head is available in a variety of
wattages, and is constructed of gray polycarbonate to match the IE Series
housing.
2. Housing: Constructed of impact resistant, fiberglass reinforced polyester.
Housing color is gray and includes stainless steel hardware. View-through
window allows easy monitoring of AC indicator and optional voltmeter and
ammeter.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Select units include a temperature-compensated charger.
Charging system is complete with low voltage disconnect, AC lockout,
brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C) to
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-
mated service life of 10 years, and an operating temperature range of 20°F
(-7°C) to 95°F (35°C).
5. Input Power Requirements: 120 VAC - 0.42 amps, 50.4 watts; 277 VAC -
0.20 amps, 50.4 watts
Code Compliance
UL 924 listed.
NSF/ANSI Standard 2 Food Equipment optional
Options
SD = Self-Diagnostics
SA = Self-Diagnostics with Alarm
SDTD = Self-Diagnostics with Time Delay
V = Voltmeter
3
A = Ammeter
3
T1 = 120 VAC Time Delay (15 minute)
T2 = 277 VAC Time Delay (15 minute)
Options (continued)
LCK1 = Line Cord (6’, 120 VAC field installed)
F1 = 120 VAC Fuse
F2 = 277 VAC Fuse
P1 = 120 VAC Power Switch
P2 = 277 VAC Power Switch
DC = DC Power Switch
ST = Special Input Transformer (specify voltage and frequency)
HTR1 = 120 VAC Heater (Not UL listed)
HTR2 = 277 VAC Heater (Not UL listed)
S = Shatter Resistant Lamp Head Shield
Multiple option configurations may void UL listing. Consult factory for specifics.
Accessories
WG5 = Wire Guard (25-75w units)
WG = Wire Guard (100w units)
NSF = NSF/ANSI Standard 2 Food Equipment
IE
SERIES VOLTAGE BATTERY/DC VOLTAGE # OF HEADS LAMP HEADS
6V, Lead Calcium
28L = 28W Unit
1
50L = 50W Unit
75L = 75W Unit
10L = 100W Unit
1,2
6V, Nickel Cadmium
25N = 25W Unit
50N = 50W Unit
2 = Two
1 = One
Blank = No Heads
1 = 6V
2 = 12V
IE = NEMA-Rated
Emergency Lighting Unit
6V, Tungsten
IT8 = 8W
IT18 = 18W
IT25 = 25W
IT30 = 30W
6V, Halogen
IH6 = 6W
IH8 = 8W
IH12 = 12W
NOTES:
1) Includes temperature compensated
charger.
2) Units come standard with AC input fuse.
3) Not available with SD, SA and
SDTD options
Complete Fixture consists of unit and two lamp heads. Select options and accessories below.
How to Specify:
12V, Lead Calcium
50L = 50W Unit
1
10L = 100W Unit
1,2
12L = 125W Unit
1,2
15L = 150W Unit
1,2
18L = 180W Unit
1,2
12V, Pure Lead
12P = 120W Unit
2
12V, Nickel Cadmium
25N = 25W Unit
50N = 50W Unit
10N = 100W Unit
12N = 125W Unit
2
15N = 150W Unit
12V, Tungsten
IT12 = 12W
IT18 = 18W
IT25 = 25W
IT30 = 30W
12V, Halogen
IH8 = 8W
IH12 = 12W
IH50 = 50W
100 Watt to 180 Watt Units
25 Watt to 75 Watt Units
19.4”
(49.2 cm)
6.8”
(17.3 cm)
7.3”
(18.7 cm)
21.4”
(54.4 cm)
19.4”
(49.4 cm)
13.2”
(33.6 cm)
11.2”
(28.5 cm)
21.4”
(54.4 cm)
15.2”
(38.6 cm)
13.2”
(33.6 cm)