Lightolier HS Series Indoor Furnishings User Manual


 
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
HS Series Emergency Lighting HS
Page 1 of 1 Explosion Proof Self-Contained Fixture
Lightolier is a Philips group brand
The HS Series self-contained emergency lighting unit is ideal for use in hazardous locations where explosive materials may be present. The HS Series is UL
listed for use in Class I, Division 1, Groups C & D; Class II, Division 1, Groups E, F & G, and Class III areas.
Features
1. Illumination: Illumination is accomplished with three 12 volt, 20 watt
MR16 lamps. Each high intensity lamp can be independently adjusted to
provide custom emergency lighting to a specific area.
2. Housing: Copper-free cast aluminum enclosure with a corrosion resistant,
epoxy powder coat finish. Includes high impact, heat resistant globe with a
cast aluminum globe guard.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect,
AC lockout, brownout protection, AC indicator lamp and remote hazardous
location test switch.
4. Battery: Includes four maintenance free lead calcium batteries to provide
12 VDC output of 60 watts for 90 minutes.
5. Input Power Requirements: 120 VAC - 60 watts; 277 VAC - 60 watts
Code Compliance
UL 924 listed.
Accessories
EFK2 = Exit Accessory Kit (red letter only)
How to Specify:
HS THF6012
SERIES MOUNTING LAMP
CONFIGURATION WATTAGE
THF6012 = (3) 12V, 20W Halogen
W = Wall
P = Pendant
C = Ceiling
HS = Self-Contained
Hazardous Location
Emergency Lighting
Unit
Complete Fixture consists of base fixture with three lamps. Select accessories below.