Filter
Top Products
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D1008
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Tangent
™
Track Lighting System FXS
Page 1 of 2 Suspension Track
95 5/8 in [2429 mm]
1 3/8 in [34 mm]
3/8 in [9 mm]
3/16 in
3/16 in
1
2
6
4
3
47 5/8 in [1210 mm]
95 5/8 in [2429 mm]
143 5/8 in [3648 mm]
1 3/8 in
[34 mm ]
3/8 in [9 mm]
3/16 in
3/16 in
1
6
6
5
Ordering Information
Catalog No. Finish Description Track Mountings
FXS04
FXS08
FXS12
FXS52
FXS53
FXS54
FXS55
FXS67
FXS68
FXS84
FXS86
FXT08
FX100
Clear Anodized
Clear Anodized
Clear Anodized
Silver
Silver
Silver
Clear Anodized
Silver
Silver
Silver
Silver
Clear Anodized
n/a
4’ Tangent Suspension Beam Track
8’ Tangent Suspension Beam Track
12’ Tangent Suspension Beam Track
Suspension Variable Angle Coupler, Mechanical Only
Suspension Variable Angle Coupler, Electro/Mechanical
Suspension Mini Coupler, Electro/Mechanical
Suspension Mini Coupler, Mechanical Only
Tangent Suspended Power Feed Canopy, 10'
Tangent Suspension Non-Powered Cable Kit, 8'
Tangent Suspension 18" Stem Kit
Tangent Suspension 48" Stem Kit
8’ Tangent Suspended Truss Track
Bending Tool
Tangent Suspended Track and Suspended
Truss Track may be suspended with stems at a
maximum of 6’ on center. Additional suspension
points may be necessary when creating patterns
or for balancing loads.
Features
Tangent Suspended Track and Truss Track are a one-circuit electrical distribution
system designed to support and supply all Tangent lighting units in a flexible
manner. The track can be installed individually in straight runs or in a variety of
patterns using the appropriate connectors. The track may also be field bent by
hand or with an FX100 bending tool into curves with a minimum radius of 3'. All
track lengths can be field cut.
1. Tangent Suspended Track: Anodized aluminum with a clear protective
coating
2. Truss Track: Anodized aluminum with a clear protective coating
3. Insulating Liner: Clear polycarbonate; houses conductors
4. Conductor (2): Tin plated copper
5. Polarity Dimple: Identifies the 120V line conductor
6. End Cap: Silver painted polycarbonate
Finish
Tangent Suspended Track and Truss track are anodized aluminum with a clear
protective coating. Connectors and end caps are painted in a coordinating silver
finish. All painted finishes are baked enamel.
Electrical
Capacity is 20 amps at 120 volts, 60Hz per branch circuit. The track units are
polarized and continuously grounded throughout. Electrical conductors are
contained in the polycarbonate extrusion. Track is intended for wiring to branch
circuit building wire with ground. All wiring must be in accordance with National
and Local Codes.
Labels
cULus; Patent Pending
FXS04
FXS08
FXS12
FXS52
FXS53
FXS54
FXS55
FXS67
FXS68
FXS82
FXS84
FXS86
FXT08
FX100
95 5/8 in [2429 mm]
1 3/8 in [34 mm]
3/8 in [9 mm]
3/16 in
3/16 in
1
2
6
4
3