Filter
Top Products
Calculite
®
HID Adjustable Accent C4T4GA-MHT4RF
Page 1 of 2 4 1/2" Aperture, T4.5 Ceramic Metal Halide Glasslite, Flood
9
10 11 1 458 23
6
7
1 1/8" (29 mm) max.
Ceiling Thickness
8" (203 mm)
Vertical Adjustment:
3/4" (25 mm) to
2 7/8" (73 mm)
5/8" (16 mm)
5-1/2" (140 mm) Dia.
4-1/8 (105 mm) Dia.
Top View
13-7/8" (352 mm)
20" (508 mm) to
30" (762 mm)
8-1/8" (206 mm)
15" (381 mm)
10"
(254 mm)
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • AO5O4
Features
1. Flood Upper Reflector: Specular textured aluminum; provides 40° beam.
Interchangeable with 12° Spot (MHT4RS) and 25° Narrow Flood (MHT4RNF);
see spec sheets C4T4GA-MHT4RS and C4T4GA-MHT4RNF.
2. Trim Kit: One piece borosilicate etched glass.
3. Trim Kit Adjustment Mechanism: Provides 35° vertical tilt, 360°
horizontal rotation; lockable. Patented EZ-Aim™ Helical Drive System
provides fast and accurate hot aiming with Philips screwdriver.
4. Socket Housing: Galvanized steel, pre-wired with G8.5 pulse rated socket.
Snaps onto yoke for secure attachment without tools; unitized construction
assures proper alignment of lamp to optics for consistent optical performance.
5. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover
for top re-lamping.
6. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
9. Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .
10.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90° C through branch circuit conductors. Allows inspection from below.
11.Accessory Holder: Sold separately catalog # CAH4; die-formed steel, matte
black finish, slide-in installation. Accepts up to two 3 3/4" dia. media.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high
power factor, T.H.D. <15%, thermally and transient protected, RMI/RFI complies
with FCC Part 18 non-consumer limits, shut-down circuit at end of lamp life,
sound rating “A”, -5°F minimum starting temperature, Type 1 Outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
20W MH M156 120/277 0.21/0.10 23
39W MH M130 120/277 0.39/0.17 44
70W MH M139 120/277 0.67/0.29 78
Options and Accessories
Chicago Plenum: Consult Factory
Labels
UL (Suitable for Wet Locations), CSA, I.B.E.W.
Ceiling Cutout: 5 1/8” (130mm) Dia.
For Complete Fixture Order: Glasslite Trim Kit + Flood Upper Reflector (MHT4RF) + Frame-In Kit. Each Sold Separately.
Glasslite Trim Kit + Flood Upper Reflector Frame-In Kit Lamp
C4T4GA + MHT4RF (Flood Upper Reflector)
Etched glass, with matching flange.
C4A20T4E1 Electronic 120V 20W T4.5 MH
C4A20T4E2 Electronic 277V 20W T4.5 MH
C4A39T4E1 Electronic 120V 39W T4.5 MH
C4A39T4E2 Electronic 277V 39W T4.5 MH
C4A70T4E1 Electronic 120V 70W T4.5 MH
C4A70T4E2 Electronic 277V 70W T4.5 MH
Flood
Upper Reflector