Filter
Top Products
Calculite
®
HID Adjustable Accent C4T4A-MHT4RS
Page 1 of 2 4 1/2” Aperture, T4.5, Ceramic Metal Halide, 12° Spot
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Spot Upper Reflector: Specular faceted aluminum; provides 12° beam.
Interchangeable with 25° Narrow Flood (MHT4RNF) and 40° Flood (MHT4RF);
see spec sheets C4T4A-MHT4RNF and C4T4A-MHT4RF.
2. Trim Kit: Low brightness aperture cone; anodized aluminum, self-flanged in
painted white or aperture-matching polished flange. Consult factory for other
finishes.
3. Lamp Shield: High-temperature glass as required by code; captive during
re-lamping.
4. Trim Kit Adjustment Mechanism: Provides 35° vertical tilt, 360° horizontal
rotation; lockable. Patented EZ-Aim Helical Drive System provides fast and
accurate hot aiming with Philips screwdriver.
5. Socket Housing: Galvanized steel, pre-wired with G8.5 pulse rated socket.
Snaps onto yoke for secure attachment without tools; unitized construction
assures proper alignment of lamp to optics for consistent optical performance.
6. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover
for top re-lamping.
7. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
8. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
9. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
10.Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .
11. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90° C through branch circuit conductors. Allows inspection from below.
12. Optional Accessory Holder: Sold separately catalog # CAH4; die-formed
steel, matte black finish, slide-in installation. Accepts up to two 3 3/4" dia.
media.
Features (cont.)
13.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating “A”,
-5° F minimum starting temperature, Type 1 Outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
20W MH M156 120/277 0.21/0.10 23
39W MH M130 120/277 0.39/0.17 44
70W MH M139 120/277 0.67/0.29 78
Options and Accessories
Chicago Plenum: Consult Factory
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W.
Ceiling Cutout: 5 1/8” (130mm) Dia.
For Complete Fixture Order: Trim Kit + Spot Upper Reflector (MHT4RS) + Frame-In Kit. Each Sold Separately.
Trim Kit + Spot Upper Reflector Frame-In Kit Lamp
C4T4A + MHT4RS (Spot Upper Reflector)
CLW Specular Clear, White Painted Flange
CLP Specular Clear, Matching Flange
CCDW Comfort Clear Diffuse, White Painted Flange
CCDP Comfort Clear Diffuse, Matching Flange
CCZW Champagne Bronze, White Painted Flange
CCZP Champagne Bronze, Matching Flange
C4A20T4E1 Electronic 120V 20W T4.5 Ceramic MH
C4A20T4E2 Electronic 277V 20W T4.5 Ceramic MH
C4A39T4E1 Electronic 120V 39W T4.5 Ceramic MH
C4A39T4E2 Electronic 277V 39W T4.5 Ceramic MH
C4A70T4E1 Electronic 120V 70W T4.5 Ceramic MH
C4A70T4E2 Electronic 277V 70W T4.5 Ceramic MH
Spot
Upper Reflector