Filter
Top Products
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • E1107
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
Evolution Lensed Wall Washer C3MRL
Page 1 of 2 3" Aperture, MR16 (12V)
Spec. Sheet
C3MRL
IC AirSeal Frame:
C3AICLV
C3ALCLVE1
Features
1. Trim Kit: Low brightness aperture cone; 0.040" aluminum, anodized; 50°
visual cut-off to lamp and lamp image. Cone keyed to kick reflector with
direction spread lens distribute light smoothly for vertical surface wall
washing. Captive lens during relamping. Hinged, and snaps on for easy
tool-less installation. Self-flange in painted white or aperture matching
polished flange. Flangeless trim used with Plaster Trim Ring accessory.
Interchangeable with other 3" Evolution trims.
2. Lamp Support: Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 1" diam-
eter accessories.
3. Cover Glass: High temperature, soft focus lens.
4. Thick Ceiling Ready Brackets: Die-form steel, matte black finish.
Adjust trim kit vertically to accommodate up to 2" thick ceiling, lockable.
5. Lampholder: Procelain bi-pin socket. Pre-wired with No.18 AWG Teflon
leads.
6. Horizontal Adjustment Mechanism: Built-in ready for adjustable trim,
matte black finish.
7. Frame Vertical Adjustment Mechanism (C3LV): Accommodates
mounting to virtually any ceiling system using pre-installed mounting bars,
or 1/2" EMT tubing (by others). Single locking features secures all adjust-
ments. Alignment holes and markings allow fixture to be pre-set prior to
installation. Final adjustment can be made from below inside fixture.
8. Mounting Bars (C3LV): Galvanized steel, 0.048"; pre-installed telescop-
ing bars extend from 20" to 30" long and lock securely into position. Built-in
locking tabs provide positive attachment to common T-bar systems. Self-
centering feature simplified installation in 24"O.C. grid systems. Attaches
to steel or wood joists without accessories.
9. Transformer: Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-
voltage, core & coil. Electronic: 120V or 277V 50/60 Hz., regulated lamp
voltage, HPF, EMI and circuit protections, thermal auto-reset, quiet operation.
Features (continued)
10. Frame-In Kit: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal
®
- Insulation must be kept 3" away from any
parts of the luminaire and must not be placed above luminaire in a manner
which will entrap heat.
IC AirSeal
®
- Luminaire may be in direct contact with thermal insulation.
Labels
U.L. (Suitable For Wet Locations), I.B.E.W.; U.S. & Foreign Patents Pending
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W
for ceiling thickness greater than 1" (up to 2").
Options and Accessories
2" dia. Color Filters/Specialty filters: See ADF2/AF2 specification sheets
2" Dia. Louver: AL2HC
Plaster Trim Ring (use with flangeless trim): CA3FMR
Chicago Plenum: Consult Factory
Ceiling Cutout: 3 1/2" (130mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Trim Kit Frame-In Kit Lamp*
Cone Finish
White Flange Polished Flange Flangeless
Clear C3MRL CLW C3MRL CLP C3MRL CLFT
Comfort Clear Diffuse C3MRL CCDW C3MRL CCDP C3MRL CCDFT
Champagne Bronze C3MRL CCZW C3MRL CCZP C3MRL CCZFT
Gold C3MRL GDW C3MRL GDP C3MRL GDFT
Matte White C3MRL WHW NA C3MRL WHFT
Specular Black C3MRL BKW C3MRL BKP C3MRL BKFT
C3LV Non-IC Magnetic 120/277V 42W-65W MR16 (12V)
C3LVE1 Non-IC Electronic 120V 20W-65W MR16 (12V)
C3LVE2 Non-IC Electronic 277V 20W-65W MR16 (12V)
C3ALV Non-IC AirSeal
®
Magnetic 120/277V 42W-65W MR16 (12V)
C3ALVE1 Non-IC AirSeal
®
Electronic 120V 20W-65W MR16 (12V)
C3ALVE2 Non-IC AirSeal
®
Electronic 277V 20W-65W MR16 (12V)
C3AICLV IC AirSeal
®
Magnetic 120 20W-50W MR16 (12V)
C3AICLVE1 IC AirSeal
®
Electronic 120V 20W-50W MR16 (12V)
Note: Magnetic not recommended for residential or noise sensitive areas.
1/2"
(13mm)
2" (59mm) Max.
Ceiling Thk.
2 7/8" (73mm) Dia.
4" (102mm) Dia.
Flangeless Trim with
Plaster Ring Accessory
C3LV
9 1/2"
(242mm)
9"
(229mm)
1/2" (13mm)
C3AICLV
Vertical Adjustment
1" (25mm) to
2 3/4" (70mm)
3 3/8" (86mm) Dia.
11
1
6 7 9 84 2 35
5 1/2"
(140mm)
5"
(127mm)
Plus Ceiling
Thk.
Non-IC Frame:
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal Frame:
C3ALV
C3ALVE1
C3ALVE2
Non-IC:
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal:
C3ALV
C3ALVE1 C3ALVE2
IC AirSeal:
C3AICLV C3AICLVE1
5" (127mm)
12 5/8"
(321mm)
14 3/8"
(365mm)
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
10 1/8"
(257mm)
9" (229mm)
11 3/16"
(284mm)
22 3/8"
(568mm)
14 5/8"
(372mm)