Lightolier C3ALV Indoor Furnishings User Manual


 
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • D1207
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
Evolution Non-IC Airseal
®
Frame-In Kit C3ALV
Page 1 of 1 3" Aperture, MR16 (12V)
Features
1. Housing: Drawn, 0.036" (20 Ga.) steel. Matte black finish. Tight rigidly
built housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or
75pa), which complies with Model Energy Code and Washington State
Energy Code and reduces heat loss and condensation in ceiling.
2. Mounting Frame: Die-formed, 0.036" (20 Ga.) steel, matte black finish.
1/2" deep integral lip. Four slots are positioned 90° apart to simplify
alignment.
3. Trim Kit Horizontal Adjustment Mechanism: Die-formed steel ring,
matte black finish. Provides 362° horizontal stop, lockable with Philips
screwdriver.
4. Thick Ceiling Vertical Adjustment Mechanism: Adjustable trim kit
vertically to accommodate up to 2" thick ceiling, tool less and lockable.
5. Mounting Bars: Galvanized steel, 0.059" (#16 ga.). Bars pivot for easy
attachment and wire-in below ceiling line. Pre-installed telescoping
bars extend to accommodate 16" to 24" O.C. joist spacing. Bars can
accommodate 12" O.C. joist spacing after a slight field modification.
Integral nails for secure attachment to wood; attach to T-bar ceilings with
out the need of accessories.
6. Lampholder: Procelain bi-pin socket. Pre-wired with No.18 AWG
Teflon leads.
7. Junction Box: 3-1/2" X 4" X 2-3/8" deep; 0.063" (#14 ga.) galvanized
steel. UL listed for maximum of (8) No. 12 AWG 90° C through branch
circuit conductors. Accessible from inside and outside of luminaire.
Outside J-Box door is hinged for maximum opening.
8. Thermal Protector: Meets NEC and UL requirements. Insulation must
be kept 3" away from any parts of the luminaire and must not be placed
above luminaire in a manner which will entrap heat.
9. Trim Kit: Order Separately. See individual trim kit specification sheets for
information.
Electrical:
Transformer: Replaceable from below; Transformer door rotates into fixture,
positioning transformer directly over aperture to allow one-handed removal
Magnetic: 120V/277V 60 Hz. dual-voltage, core & coil. (Note: Magnetic not
recommended for residential or noise sensitive areas.) Electronic: 120V or
277V 50/60 Hz., regulated lamp volage, HPF, EMI and circuit protections, ther-
mal auto-reset, quiet operation.
Dimming Controls: Use only dimmers specifically designed for use with
magnetic or electronic transformers. Consult Lightolier Control for informa-
tion. Low voltage luminaires may produce audible sound when used with dim-
mers, which may be objectionable in acoustically critical areas.
Labels
U.L. (Suitable For Damp Locations), I.B.E.W. U.S. & Foreign Patents pending.
Complies with Air Leakage Requirements as stated in the Model Energy Code
and the Washington State Energy Code.
Options and Accessories
Plaster Trim Ring (use with flangeless trim kit): CA3FMR
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
Ceiling Cutout: 3-1/2” (89 mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Frame-In Kit Lamp*
Trim Kit (See individual Trim Kit Specification Sheets)
C3ALV
C3ALVE1
C3ALVE2
Magnetic 120V/277V
Electronic 120V
Electronic 277V
42W-65W MR16 (12V)
20W-65W MR16 (12V)
20W-65W MR16 (12V)
Downlight
Wall Washer
Downlight
(Wet Loc.)
Adjustable Accent
Glasslite
Downlight
(Wet Loc.)
Glasslite
Adjustable
(Wet Loc.)
Open
Reflector
1 1/4"
Pinhole
Cone Cone
(Wet Loc.)
1 1/4"
(Wet Loc.)
C3MRD
Series
C3MRPD
Series
C3MRL
Series
C3MRA
Series
C3MRW
Series
C3MRPA
Series
C3MRGD
Series
C3MRGA
Series
* Lamp wattage restriction: 65W for up to 1" thick ceiling, 50W for ceiling thickness greater than 1" (up to 2")
Note: Magnetic not recommended for residential or noise sensitive areas.
5 1/2"
(140mm)
5" (127mm)
Plus Ceiling Thk.
1/2" (13mm) Lip
2" (59mm) Max.
Ceiling Thk.
3" (76mm) Dia.
4" (102mm) Dia.
4
2 9 6 3 57
1
8