Filter
Top Products
B600 Ceiling Cutout: 6 9/16" Dia., B600RM Ceiling Cutout: 6 1/2" Dia.
Reflector Trims Frame-In Kit Lamp
B7054CLW Specular Clear finish with white flange B600 A19, 100W max.
B7054CLP Specular Clear finish with polished flange MB19, 100W max.
B7054CL Specular Clear finish with molded trim ring (flangeless) A21, 150W max.
B7054 Add suffix for other finishes (see options)
Remodel Frame-In Kit Lamp
B600RM (for use in existing ceilings Same as B600
with 3/8” min. to 2” max. thickness)
1
2
3
4
5
6
7
3"
9 5/8"
A21
8 7/8"
A19
MB19
1" min.
2 1/8" max.
(Ceiling Runner)
6 1/2"
Flush
7 1/4"
Overlap
6" Dia.
1 1/8" max.
Ceiling Thickness
Top View
Molded
Trim Ring
Flush Trim
(Molded trim ring removed)
Overlap Self-Flange
Matte White or Polished
9 8
REMODELER
FRAME-IN KIT
B600
Top View
Remodel (B600RM)
Frame-In Kit
Calculite
®
Incandescent Open Downlight B7054
Page 1 of 2 6” Aperture A19 / MB19 / A21
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Socket Cup: Die-cast aluminum cup effectively dissipates heat and assures
lamps maintain proper optical alignment to reflector. Snaps onto reflector
neck for easy tool-less installation. Can be adjusted without tools from
inside or outside of fixture to accommodate two different lamp sizes.
Contains medium base porcelain socket with nickel plated screw shell wired
and No. 18 SF-1 leads to J-Box.
2. Mounting Brackets: 16 ga. steel. Adjust from inside of fixture. Use 3/4" or
1 1/2" lathing channel, or 1/2" (11/16" O.D.) EMT pipe, or optional mounting
bars.
3. Retaining Springs: Precision-tooled steel friction springs secure reflector to
mounting frame for quick, tool-less installation.
4. Reflector: 16 ga. Specular Alzak
®
aluminum, 45° visual cutoff to lamp and
lamp image. Available with white or polished flange, or with removable
white molded trim ring (field paintable).
5. Junction Box: 14 ga. Steel, 4" x 3 1/2" x 2" box allows inspection from
below.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
7. Mounting Frame: Die-cast aluminum suitable for dry or plaster. Provides
flush trim in plaster ceiling.
8. Multi-Groove Baffle (B7054MG): One piece seamless Aluminum. Sharply
detailed concentric rings with “sawtooth” profile, optical black finish.
Permanently fastened to Specular Clear reflector.
9. Black Cone (B7054BK): Specular Black Alzak
®
aluminum. Permanently fas-
tened to Specular Clear reflector.
Other Reflector Finish Options
Comfort Clear Diffuse CCD Specular Black BK
Specular Gold GD Multi-Groove Baffle MG
White WH (MG available with molded trim ring only)
Flange Options
White W Polished Flange P
Flangeless Leave Blank (molded trim ring)
Options & Accessories
18" Mounting Bars 1950 (set of 2)
27" Mounting Bars 1951 (set of 2)
T-Bar Anchor Clips 1956 (set of 4, for 1950 & 1951 bars)
Existing Ceiling Clips 7998 (set of 2)
Sloped Ceiling Adapters 7920 (see SCA specification sheet)
Step Down Transformer 7997 (see separate specification sheet)
Chicago Air Plenum LC (add suffix to Frame-in Kit)
Electrical
B600 UL Listed for through branch circuit wiring with max. of (8) No. 12, 75°C
supply conductors or 60°C conductors for end of run.
B600RM UL Listed for No. 12 AWG 60°C supply conductors.
Labels
UL Listed (Suitable for damp locations), I.B.E.W.
Alzak
®
is a registered trademark of ALCOA.