Lightolier 8611E Indoor Furnishings User Manual


 
4 11/16"
5"
2"
1 1/8"
4
8
2
7
1
6
5
9
3
Lytespan
®
Accent Lighting System 8611E
Page 1 of 1 LyteJacks Surface Power Jack
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • A0206
Features
1. Canopy/Transformer Cover: Cast Aluminum. .1" nominal wall thickness
2. Mounting bracket: Steel, attached to J-Box for mounting PowerJack.
3. Plug Jack: Molded high heat resistant polymer. Accepts all LyteJack fix-
tures
4. Insulated Wires: To be attached to 120V 60Hz. Supply circuit. Supply wires
must be rated for minimum temperature of 75°C.
5. Plug Jack Support: Die-cast aluminum. Holds plug jack rigidly to ensure
proper engagement and operation of LyteJack fixtures.
6. Polycarbonate Stem Bushing: Accurately guides LyteJacks into plug jack.
When using Lytedrops, remove by using a coin such as a dime.
7. Mounting Screws: (2) Steel screws painted to match fixture color.
Attaches power jack to mounting bracket.
8. 4" Octagonal Outlet Box: (By others).
9. Insulated Ground Wire: 18Ga wire attached to canopy and connected to
the mounting bracket during insulation.
Electrical
60 Watt Class 2 low voltage (12V) Electronic transformer with auto-reset
thermal cut off. Supply circuit must be 120V-60Hz.
Dimming
Use only dimmers specifically designed for use with electronic transformers.
Low voltage fixtures may produce audible sound when dimmed.
Finish
All painted finishes baked enamel.
Labels
UL; CUL
Catalog No. Finishes Mounting Use With
8611EWH Matte White To 4" Octagonal Lytedrop or Focal Jack Luminaires
8611EBK Matte Black Outlet Box 50W Max.
8611EAL Aluminum Ceiling Mount
8611E