Lightolier 8608 Indoor Furnishings User Manual


 
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B1106
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytespan
®
Accent Lighting System 8608
Page 1 of 1 LyteJacks 75W Remote Transformer
Features
1. Transformer: Magnetic type, 75W, 120V or 277V input, 12V output.
2. Steel Splice Box: Contains knockouts for conduit.
3. Divided Wiring Compartment: Contains taps for 120V or 277V supply and
secondary wires from transformer.
4. Thermal Protector
5. Mounting Bar: (See Accessories).
6. Steel Mounting Brackets: Used with mounting bars (order separately) for
mounting onto ceiling runners.
7. T-Bar Clips
8. Ceiling Runner
Electrical
Low voltage magnetic transformer, 120V or 277V input, 12V output, powers
any Point Power Jack. The transformer is limited to a total load of 75W or (2)
Point Power Jacks, whichever is fulfilled first. Thermally protected. Type Non-IC.
Requires min. 75°C supply wires. Use only dimmers specially rated for induc-
tive loads (low voltage fixtures equipped with magnetic transformers) such as
Lightolier Lytemode and Scenist systems and Lightolier dimmers carrying the
suffix VA.
Labels
UL; I.B.E.W.
Patents
Products shown here are protected by applicable patents and patents pending.
Catalog No. Mounting Accessories (Order Separately)
Catalog No. Description
8608 Recess in accessible ceiling. Access above ceiling required 1950 18” Mounting Bars (Set of 2)
Insulation must be kept 3” away from transformer sides 1951 27” Mounting Bars (Set of 2)
and wiring compartment; and must not be placed above unit 1956 T-Bar Clips (Set of 4)
as to entrap heat.