Filter
Top Products
Decorative Wafer
®
10351
Page 1 of 2 Ceiling or Wall Mounted Compact Fluorescent 2 Lt. 24/27W Twin Tube
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Housing: Die-formed 20 ga. steel.
2. Cord: (2) .030 dia. Nylon
3. Gasket: Die-cut white finish closed cell Ethylene Vinyl Acetate.
4. Spring Clip: (4) Zinc plated spring steel.
5. Diffuser: Formed white translicent Acrylic. Held to housing by four spring
clips. Two Nylon cords are supplied to allow diffuser to hang from housing
during relamping.
6. Lamp Socket: (2)
7. Ballast Cover: 26 Ga.steel.
8. Ballast: 2 Lt. HPF Magnetic or 2 Lt Electronic.
9. Lamp Support Clip: (2).
10.Knock-Out Slots: (4) 9/32” x 1/2”
Electrical
2 Lt. Rapid Start, High Power Factor, Class “P”, 120V, Magnetic or Electronic bal-
last. Min. starting temp. 50°F. Fixture requires minimum 90°C rated supply wire.
Mounting
Mounts directly to ceiling or wall using four 9/32” x 1/2” knock-out slots.
Finish
All painted surfaces, baked enamel.
Labels
UL listed suitable for damp conditions, I.B.E.W.
Information
Catalog No. Finish Length Width Height/Extension Ballast Lamps
10351WH White 16” 16” 3 1/2” 120V HPF Magnetic (2) 24W/27W Twin Tube 2G11 Base 4-Pin
10351WH2 White 16” 16” 3 1/2” 277V HPF Magnetic 2G11 Base 4-Pin
10351WH81 White 16” 16” 3 1/2” 120V Electronic General Electric – F27/24BX/SPX*
10351WH82 Whitw 16” 16” 3 1/2” 277V Electronic Osram/Sylvania – FT24DL/*
Philips – PL-l 24W/*
*Manufacturers’ color temperature designation
Fixture conforms to Americans with Disability Act (ADA) Federal regulations—
Protruding Objects.