Lightolier 1004ICR Indoor Furnishings User Manual


 
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • G1006
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster
®
Recessed Downlighting 1004ICR
Page 1 of 1 5" Aperture
0
Incandescent Convertible IC/Non-IC Remodeler Frame-In Kit
4
5
1
3
2
11 3/8"
Overall Length
Frame-In Kit
Top View
5 1/4"
Reflector Trim
Ceiling Opening 5 3/8" Diameter
Features
1. Housing: .032 (#20 ga.) Aluminum. U.L. listed convertible IC/NON-
IC. Integral retaining spring secures housing to ceilings up to 2" thick.
Removable for access to junction box and ceiling plenum.
2. Junction Box: 2 1/2" X 2 1/2" X 3 1/2" (21 cu. in.) .032 (#22 ga.) galva-
nized steel. U.L. listed for 90°C supply wire. Integral cable clamps permit
attachment of non-metallic (#12 or #14 ga.) Romex
®
cable without tools or
additional connectors.
3. Socket Housing: Impact extruded aluminum or galvanized steel. Attached
trim retaining spring secures trim to any height on housing wall.
4. Socket: Porcelain medium base: nickel plated screw shell. Pre-wired with
#18 ga. SF1 (300 VOLT 200°C) leads to junction box.
5. Thermal Protector: Meets NEC and U.L. requirements. Located inside
housing.
Options & Accessories
AirSeal
®
Kit: LAS56R
Labels
UL (Type IC/NON-IC Convertible; Suitable for Damp Locations).
5" Aperture: Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight Adjustable
Reflector Cone Satin Baffles Basic Eyeball Enclosed Open Wall
Cone White Diffuser Wet Location Washer
1004ICR 1045 1012 1008 1005 1071 1022 1021* 1081CD 1085*
1046 1012NM 1008NM 1005NM 1022WH 1024* 1081WH
1046CD 1013 1010 1005BNM 1082 1177LX
1013BK 1010NM 1005WH 1088 1178LX
1013WH 1076 1088GW 1090*
1013NM 1076WH 1088WH
1013CD
1013BKNM
1013CDNM
7 1/2"
Romex
®
is a registered trademark of General Cable Industries Inc.
* For Non-IC applications only.