Lightolier 1000LVR Indoor Furnishings User Manual


 
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • G1208
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster
®
Recessed Downlighting 1000LVR
Page 1 of 1 5" Aperture Standard Low Voltage MR16 Non-IC Remodeler Frame-in Kit
Features
1. Junction Box: 4" x 3 1/2" x 2"; .063" (#14 ga.) galvanized steel. UL listed for
90° C supply wire. Integral cable clamps permit attachment of nonmetallic
Romex
®
or armored cable without need of additional connectors.
2. Transformer: Outboard mounted, magnetic, 120V. primary, nominal 12V.
secondary. Removable from below.
3. Socket Housing: .036" (#20 ga.) galvanized steel.
4. Socket: Field replaceable. Two pin socket, pre-wired with #18 SF1 leads to
junction box.
5. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
6. Mounting Ring: .048 (#18 ga.) galvanized steel. Accommodates existing
ceilings up to 2" thick. Attaches securely to any type of ceiling material
without tools using (3) mounting straps provided. Push-in/twist out clips hold
reflector flush to ceiling. Includes adhesive backed aperture template.
Dimming
Dimming Controls: Use only dimmers specifically designed for use with
transformers, like Lightolier Onset
®
, Sunrise
®
series LV or VA dimmers, or any
Lightolier Controls dimming system. Low voltage fixtures may produce audible
sound when used with dimmers, which may be objectionable in acoustically criti-
cal areas.
Options & Accessories
MR16 Socket Replacement: 1975A
277V Remote Step 7997 - 277V down to 120V
Down Transformer: 300W max. load.
Labels
UL (Suitable for Damp Locations), I.B.E.W.
5 1/2”
Frame-In Kit
Reflector Trim
Ceiling Opening
Romex
®
is a registered Trademark of General Cable Industries Inc.
US Patent No’s.: 5,957,572 and other US and Foreign Patents Pending.
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Adjustable
1000LVR Baffles Aperture Cone Pinhole Elbow
1055LV 1056LV 1064WDLV 1052LV 1062LV
1055WHLV 1063LV 1064WDPLV
1064LV
1064CDLV