Filter
Top Products
HEARTH PRODUCTS
KITS AND ACCESSORIES
INSTALLATION INSTRUCTIONS FOR THE ANDIRON KIT
FOR USE WITH SYMMETRY SERIES GAS FIREPLACES
SYMMETRY SERIES ANDIRON KIT
Printed in U.S.A. © 2009 by Lennox Hearth Products
P/N 506019-43 REV. N/C 05/2009
The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
LHP
1110 West Taft Avenue • Orange, CA 92865
Figure 1
KIT CONTENTS
2 - Andirons, 4 - Attaching Screws and these instructions.
TOOLS NEEDED - Phillips Head Screwdriver.
INSTALLATION INSTRUCTIONS
Step 1. Follow the procedure "Turning Off Gas To Unit", located on
the Lighting Instructions pullout labels in the control compartment of
the unit and in the Installation Instructions (P/N 506023-08) provided
with the appliance.
Step 2. Refer to the appliance Care and Operations Instructions (P/N
506025-01) to remove the front glass enclosure panel and gain ac-
cess to the firebox interior.
Step 3. Align the holes on the Andiron brackets, with the holes
on the fireplace sub-floor and attach the Andiron with the provided
attaching screws (see Figure 1 ). It is recommended that two (2)
screws be used for each Andiron, however one (1) screw may be
used, depending on placement of the Andiron.
Step 4. Place all Lava Rock and Rockwool according to the appliance
Care and Operation Instructions (P/N 506025-01).
Step 5. Refer to the appliance Care and Operations Instructions (P/N
506025-01) and re-install the front glass enclosure panel.
Symmetry Series Andiron Kits
Model
Number
Catalog
Number
Andirons
AKT-DV H7410
AKC-DV H7411
Traditional - AKT-DV
Corinth - AKC-DV
Traditional Andrion
Attaching Bracket And Screw
Sub-Floor Holes