Lennox Hearth 775258M Indoor Fireplace User Manual


 
PILLAR FACE KITS
MODELS RAVENNA™, DESIGNER™ AND RAVELLE™ 30
INSTALLATION INSTRUCTIONS FOR INSTALLING PILLAR
FACE KITS FOR USE WITH MODELS RAVENNA™,
DESIGNER™ AND RAVELLE™ 30 GAS APPLIANCES
P/N 775258M
Rev. A, 10/2010
HEARTH PRODUCTS
KITS AND ACCESSORIES
KIT CONTENTS
Please ensure that all these parts are in one of the three boxes. The pillar
face comes packaged in three separate boxes. The following items are
included in each box:
Box 1 - Part # 75093
Cast door with glass installed
Box 2 - Part # 75092
4 ea. Ravelle 30 Mounting Brackets
2 ea. Designer and Ravenna Mounting Brackets
1 ea. Backing Plate With Cast Bottom Attached
8 ea. 5/32” Allen Head Screws
3 ea. Control Knob Extensions
1 ea. Cast Top
1 ea. Left Pillar
1 ea. Right Pillar
Box 3 - Ornate grills (upper and lower grills) - Part # 75091
or
Traditional grills (upper and lower grills) - Part # 75094
Note: The brackets to attach the pillar face assembly to the appliance are
included in the second box. Discard the unused brackets upon completion
of the pillar face assembly.
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
Revenna and Designer Cast Surround Kits (ref. form # 775,292M)
Cat. No. Model Description
75156 RDV-DBV-PCFP3044-TOP, 30 x 44 Top (Box 1 of 2)
75157 RDV-DBV-PCFP3044-SIDES 30 x 44 Sides (Box 2 of 2)
* Revenna and Designer ONLY - The pillar cast face kits also requires the
use of the surround kits listed below (sold separately - See reference
information on Page 6). The surround kit must be installed prior to
the installation of the pillar cast face kit.
Figure 1A
Cast Surround *
Pillared Face
*The cast surround kits are not for use with the Ravelle 30 fireplace.
Figure 1B
Ornate Filigree Grill (75091)
Traditional Bar Grill (75094)
TOOLS NEEDED
Phillips Screwdriver
5/32” Allen Wrench or T-Handle Wrench
GENERAL INFORMATION
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
Pillar Cast Face Kits*
37-5/8" W x 23-3/4" H
Cat. No.
Model
Description
75093 PILCST-GLASS Glass Door (Box 1 of 3)
75092 PILCST-PILRS2 Back, Pillars, Top (Box 2 of 3)
75094 PILCST-GRL-TRD3
Traditional Bar Grills (Box 3 of 3) OR
75091 PILCST-GRL-FIL3 Ornate Filigree Grills (Box 3 of 3)
Shown with Traditional Bar Grills
1