Lennox Hearth 3-Piece Louver Kit Indoor Fireplace User Manual


  Open as PDF
of 2
 
3-PIECE LOUVER ASSEMBLY KITS
GENERAL INFORMATION
These louver assembly kits may be used with Merit
™
, Merit Plus
™
or
Elite
®
series gas fireplaces. Kit applications are shown in Table 1.
KIT CONTENTS:
1 ea. Top louver assembly panel
1 ea. Bottom louver assembly panel
1 ea. Nameplate logo -
not used on short panel of EDVPF, EDVCR, EDVCL, EDPF(-2), EDCR(-2) & EDCL(-2)
1 ea. Installation Instructions
INSTALLATION INSTRUCTIONS FOR LOUVER ASSEMBLY KITS FOR USE
WITH MERIT
™,
MERIT PLUS
™,
OR ELITE
®
SERIES GAS FIREPLACES
INSTALLATION INSTRUCTIONS
Note: Do not operate fireplace without the eyebrow installed in its normal
position. See Figure 2 for models with louvers or Figure 3 for models
with radiant panels.
750,119M
Rev. B 03/2008
Hood must be installed as shown.
Hood must be installed as shown.
Top of Appliance
Top of Appliance
Louver Assembly
Top Radiant Panel
Top of Door Frame
Top of Door Frame
Figure 3 - Clean Face
Figure 1 - Louver Kit Contents
LOUVER SET KITS
Polished Brass Brushed Stainless Painted
Cat. #
Model Cat. # Model Models Where Used
88L27 LVR24PB-2 88L31 LVR24BS 88L23 LVR24C-2 EDVPF, EDPF(-2), EDVCR, EDCR(-2), EDVCL, EDCL(-2), EBVPF, EBPF(-2), EBVCR, EBCR(-2), EBVCL,
EBCL(-2), EBBAY
88L28 LVR35PB-2 88L32 LVR35BS EDV3530, ED3530, MPD3530, MPD35ST, MPD35PF, MPB35ST
88L29 LVR40PB-2
88L33
LVR40BS 88L25 LVR40C-2 EDV4035, MPD4035, EDVST, EDVPF, EDVCR, EDVCL, EBVST, EBVPF, EBVCR, EBST, EBPF, EBBAY,
EBCL, EBCR
88L30 LVR45PB-2 88L34 LVR45BS EDV4540, ED4540-2, MPD4540
26M45 LVR33MPB 26M46 LVR33MBS MDR3328, MDT3328, MPDT3328, MPDR3328
H7024
LVR22PB H7025 LVR22BS MPD35PF
Table 1
Figure 2 - Louvered Face
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Lennox
Nameplate
Top Louver
Bottom Louver
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES