JVC TS-C50P2G Indoor Furnishings User Manual


 
English
12
5. Installing the display to the wall-hanging bracket
Installation procedure
Fit the insulating spacers on the
upper part of the display into the
notches at the top of the wall-
hanging bracket.
While lifting the display up slightly,
insert the insulating spacers on the
lower part of the display into the
notches in the lower part of the
wall-hanging bracket.
Lower the display into place.
6. Securing the display
Tighten the accessory fixing screws
into the fixing screw flanges at the
left and right sides of the wall-
hanging bracket.
Fixing screws
Insulating spacer
Insulating spacer
Do not lift the display too high, otherwise it may become unhooked.
Note
Note
Be sure to tighten the left and right fixing screws to prevent the display from detaching from the wall-hanging bracket.
Note
Note
Wall-hanging bracket
Fixing screws (left and right)
Fixing screw mounts
Installation procedure