John Lewis 85573601 Fan User Manual


 
2
3
Operation
Pedestal fan
Thank you for purchasing this pedestal fan. Please read the instructions and warnings
carefully before using to ensure safe and satisfactory operation of this product.
Please retain this information for future reference.
Appliance components
1. Pedestal
2. Motor head
3. Fan blades
4. Carry handle
5. Speed controller
6. Oscillation button
7. Angle setting
8. Adjustment knob
9. Securing screw
10. Neck
The fan needs to be self-assembled, please refer to assembly section.
The fan comes with three dierent speeds.
Swithc the fan on by turning the speed controller (5) back to 1, 2, 3.
To switch the fan o, turn speed controller (5) back to 0 (B1).
The fan comes with an additional oscillation function. Turn the oscillation function
on by pushing the oscillation button (6) down (B2).
Turn the oscillation function o by pulling the oscillation button (6) up (B2).
To change the angle of the fan, loosen the angle adjuster (7), then tilt the protective
screen up or down and nally retighten the angle adjuster (7) (B3).
The fan height can be adjusted by loosening the adjustment knob (8), Please hold the
neck (10) while doing so.
Assembly
1.Fix the lower stand pole
on to the base by use of
the 4 screws provided,
and then pit the upper
stand pole.
Screw
Spring washing
Washer
2.Fix the air volume regulator
on top of the upper stand
pole by the 4 screws provided.
10