Filter
Top Products
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
02/26/2008 5:16:47 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADI060676
DESCRIPTION
Recessed medium beam lens downlight luminaire with 4 inch square
aperture utilizing horizontal BT15 tungsten-halogen lamp. Modular platform
can be reconfigured from below the ceiling to accept a broad range of lamp
modules and optical elements. Platform is suitable for 2x6 residential or
shallow plenum commercial construction. Insulation must be kept 3" from
top and sides of housing. Platform + module + element combination
produces square distribution with excellent light control and low aperture
brightness.
Frame
Galvanized steel plaster frame with
integral bar hanger receivers. Set-
screws provide positive horizontal
locking.
Collar
Matte black steel collar adjusts
vertically for 1/2" - 1" thick ceilings
and can be rotated +/- 7.5° thru the
aperture. Integral gun sights facili-
tate the use of guide strings or
laser lines. Shipped with a paint
overspray protector installed in the
collar.
Lamp Module
Installed or removed thru the
aperture or from the top and
allows lamp orientation at 0°,
90°, 180° and 270° positions.
Housing
Steel housing painted matte black
for a visually dark interior. Remov-
able hinged top allows for top
access. All fasteners are captive.
Gaskets
Closed cell gaskets achieve
restrictive airflow requirements
without additional caulking.
Optical Element
Integral lens. Mousetrap type
springs pull flange tight to ceiling.
Light trap eliminates spill light at
edge of flange and reflector.
Available in self-flanged or metal
trim ring versions.
Bar Hangers
Captive preinstalled bar hangers
adjusts from 8-1/2" to 24" wide;
pass thru feature allows shortening
without removal. Captive nail
penetrates standard and engi-
neered lumber. Mounting flange
levels platform with ceiling. Inte-
gral clip attaches directly to t-bar.
Butterfly Bracket
Provides 3" of vertical adjustment
and accept 1/2" EMT, C channel or
bar hangers.
Primary Reflector
Miro® segmented upper reflector
yields a smooth square beam with
medium distribution. Accepts
100W maximum BT15 tungsten-
halogen lamp. Will not accept a
lower efficacy A19 type lamp.
Lower Reflector
Aluminum parabolic shielding
prismatoid with integral clear glass
lens provides for 55° cutoff and is
available in a wide range of semi
specular Alzak® finishes.
Corrugated Baffle: An optional
embossed pattern that extends
through the flange adding a subtle
design element and reduces
aperture brightness.
Junction Box
(7) 1/2" trade size pry outs, (3)
integral clamps for non-metallic
cable. Rated for (8) #12 thru branch
circuits. Wago® type push wire
connectors for field connections
Thermal Protector
Self-resetting thermal protector
protects against improper lamping
and direct contact with insulation.
Lamp Socket
Ceramic E26 Edison base mounted
to lamp module connects to the
platform with electrical quick
connects
Code Compliance
Thermally protected, IP labeled
and cULus listed for protected wet
locations and ASTM-E283 AIRTITE
(tm).
P406TAT
MH4BT
E4DLSR
E4DLSRCB
100W BT15
Tungsten-Halogen
4 Inch Square Lens Downlight
4-1/2“
(114mm)
5-3/4”
(146mm)
14-9/16”
(370mm)
8-1/2”
(216mm)
4-9/16”
(115mm)
5-1/8”
(130mm)
Cutout=5-3/16”
(132mm)
ORDERING INFORMATION: Complete unit consists of platform, lamp module and optical element.
MH4BT = BT15
Horizontal Lamp
Module
E4DLSR = 4" Square
Aperture Lower
Shielding Prismatoid,
Lens
E4DLSRCB = 4" Square
Aperture Corrugated
Lower Shielding
Prismatoid,
Lens
Finish
Optical Element
Lamp Module
Flange
MH4BT
Accessories
L4x4LNR = Skytek linear spread lens
L4x4SF = Solite soft focus lens
L4x4SPD = Crystal #73 prismatic spread lens
MTR4MW = Metal trim ring, matte white
MTR4MB = Metal trim ring, matte black
MTR4SN = Metal trim ring, satin nickel
MTR4AC = Metal trim ring, antique copper
MTR4TBZ = Metal trim ring, tuscan bronze
EDC4x42 = Extended depth collar for
1-1/2 - 2” thick ceilings
EDC4x41 = Extended depth collar for
1” - 1-1/2“ thick ceilings
P406TCP = 4”
Square Aperture
Non-IC Chicago
Plenum Housing
Platform
P406TAT = 4”
Square Aperture
Non-IC Housing
Alzak Finishes
H = Clear Haze
WMH = Warm Haze
WHH = Wheat Haze
Painted Finishes
MW = Matte White
MB = Matte Black
BH = Black Haze
KH = Cognac Haze
GPH = Graphite Haze
CTH = Cobalt Haze
CCH = Chocolate Haze
[Blank] = Metal Trim
Ring, Matte White
SF = Self Flanged
SFWF = Self Flanged,
Matte White Flange
(SFWF not available
with corrugated baffle)
IRIS
®