Filter
Top Products
1
Shower Arm
Gasket
Knob on Diverter
Diverter
Shower
Accessory
Existing Gasket
FIGURE 1 - INSTALLING/USING DIVERTER VALVE
Existing
Shower Head
DIVERTER VALVE - MODEL NO. DV401C (BRASS)
Assembly, Installation and Operating Instructions
2. Clean the threads on shower arm with steel wool.
3. Install pipe thread sealing tape onto the shower arm.
4. Place the gasket provided into large end of diverter valve.
CAUTION
Always protect parts with a heavy cloth when using
wrench or pliers.
5. Using a wrench or pliers, connect large end of diverter valve to shower arm.
6. Install existing shower head and gasket onto diverter valve.
7. Install shower accessory onto last connection on diverter valve. Refer to
individual instructions of your shower accessory for complete information.
Using
1. Pull knob on diverter valve to use shower accessory.
2. Push knob on diverter valve to use shower head.
LIMITED WARRANTY
PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED
AFTER JULY 4, 1975.
This warranty is extended only to the original purchaser/user of our products.
This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.
Invacare warrants its product to be free from defects in materials and workmanship for one (1) year for the original purchaser. If
within such warranty period any such product shall be proven to be defective, such product shall be repaired or replaced, at
Invacare's option. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair
of any such product. Invacare's sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/
or replacement.
For warranty service, please contact the dealer from whom you purchased your Invacare product. In the event you do not
receive satisfactory warranty service, please write directly to Invacare at the address on the back cover. Provide dealer's name,
address, model number, date of purchase, indicate nature of the defect and, if the product is serialized, indicate the serial
number.
Invacare Corporation will issue a return authorization. The defective unit or parts must be returned for warranty inspection using
the serial number, when applicable, as identification within thirty (30) days of return authorization date. DO NOT return products to
our factory without our prior consent. C.O.D. shipments will be refused; please prepay shipping charges.
LIMITATIONS AND EXCLUSIONS: THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE TO
ADHERE TO THE ENCLOSED INSTRUCTIONS. IN ADDITION, THE FOREGOING WARRANTY SHALL NOT APPLY TO SERIAL NUMBERED PROD-
UCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR DEFACED; PRODUCTS SUBJECTED TO NEGLIGENCE, ACCIDENT, IMPROPER OPERA-
TION, MAINTENANCE OR STORAGE; OR PRODUCTS MODIFIED WITHOUT INVACARE'S EXPRESS WRITTEN CONSENT INCLUDING, BUT NOT
LIMITED TO: MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS: PRODUCTS DAMAGED BY REASON OF
REPAIRS MADE TO ANY COMPONENT WITHOUT THE SPECIFIC CONSENT OF INVACARE; PRODUCTS DAMAGED BY CIRCUMSTANCES
BEYOND INVACARE'S CONTROL; PRODUCTS REPAIRED BY ANYONE OTHER THAN AN AUTHORIZED INVACARE DEALER, SUCH EVALUA-
TION SHALL BE SOLELY DETERMINED BY INVACARE.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, IF ANY, INCLUDING THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IT SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HEREIN AND THE REMEDY FOR VIOLATIONS OF
ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CON-
TAINED HEREIN. INVACARE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.
THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.
TOOLS NEEDED: Adjustable Wrench or Pliers, Steel wool, rags,
and pipe thread sealing tape.
KITS INCLUDE:
DESCRIPTION QUANTITY
Diverter Valve 1
Gasket 1
INSTALLING/USING DIVERTER VALVE
(FIGURE 1)
NOTE: Refer to the WARNINGS in the SAFETY SUMMARY of this
instruction sheet.
Installing
1. Remove existing shower head and gasket from shower arm.
NOTE: Check ALL parts for shipping damage. If shipping damage is
noted, DO NOT use. Contact Carrier/Dealer for further instruction.
SAFETY SUMMARY
The following recommendations are made for the safe installa-
tion and use of the Diverter Valve:
WARNING
DO NOT install this equipment without first reading
and understanding this instruction sheet. If you are
unable to understand these Warnings, Cautions and
Instructions, contact a healthcare professional, dealer
or technical personnel if applicable before attempt-
ing to install this equipment - otherwise, injury or dam-
age may occur.