Filter
Top Products
Instructions for Use
Instructions for use
Always remove the plug from the power socket before fitting or removing accessories!
Connecting the vacuum cleaner
1. Assembling or removing the hose.
Assembly
a. Insert the flexible hose into the hose inlet on the front of
the vacuum cleaner.
b. Press until it clicks into position.
Removal
a. Remove the plug from the power socket when releasing
the hose from the air intake duct. Do this by gently pulling
on the hose while the release buttons are depressed.
2. Fitting the telescopic tube, accessories and floor head.
a. Remove the plug from the power supply when releasing
the hose from the hose inlet. Do this by gently pulling on
the flexible hose while the release buttons are depressed.
b. To fit the floor head to the telescopic tube, gently insert the
telescopic tube into the top of the floor head as shown.
The adjustable floor head is ideal for cleaning on carpets
and hard floors.
Floor Head
Extension Tube
Carpet Hard Floors
Maintenance
Changing the dust bag
• Alwaysoperatethecleanerwithdustbaginstalled.
• Ifyouforgettoattachthedustbagorattachitinthewrongmanner,thedustcover
may not close completely.
1. After removing the hose, open the front cover
by gently lifting the release button.
2. Rotate the support of the dust bag to the
correct position.
3. Remove the dust bag.
4. Replace with a new dust bag.
5. Close the cover by pressing down on the cover
until it is securely locked in place.
11449_HV_Performer_3000_Manual_V7.indd 8-9 16/08/11 4:48 PM