Honeywell TrueSTEAM Humidifier User Manual


  Open as PDF
of 1
 
Same Great Product.
Simplified User Interface.
Honeywell is making a running change to the user interface of our TrueSTEAM™ Humidification Systems to provide additional clarity
on the actions required to service and clean the unit. You’ll be able to easily identify which model you’re working with by locating the
date code on the TrueSTEAM box or on the unit itself located behind the right side handle. Here’s what you need to know about the
user interface to install, service and clean Honeywell TrueSTEAM.
POWER LED
• Solidgreenlightindicatescorrectinstallation
• SolidgreenlightplusablinkingredServicelightindicatesinstallationerror(seemanual)
HUMIDIFYING LED
• Solidgreenlightindicatesthattheunitishumidifying
• Nolightindicatesthatahumiditycallisnotpresent
• Blinkinggreenlightindicatesthereisacallforhumidity,buthumidicationhasnotstarted.Thisoccurswhen
 thetankisllingorduringthe5minutestandbyperiodaftermanualcleaning.
EMPTY LED
• Solidgreenlightindicatesthatdrainingiscomplete,thetankisemptyandcanberemovedfor
 manualcleaning
SERVICE LED
• Blinkingredlightindicatesaspecicerrorcode.Matchthenumberofashestotheerrorcodeinthe
 manualtoidentifythemaintenanceneeded.PressandholdtheGobuttontocleartheblinking.
DRAINING LED
• Blinkingyellowlightindicatestheunitisdraining
CLEANING REQUIRED LED
• Blinkingyellowlightindicatescleaningisrequired.FollowthearrowandpresstheDrainbuttontoinitiate
 drainingformanualcleaning.
DRAIN BUTTON
• Pressandholdtodraintheunitbeforecleaning(seeabove)
• Tobypasstheushingcycleanddraintheunitimmediately,pressandholdtheDrainandGobuttonstoinitiate
 afail-safemanualdrainoverride.Caution:Thiswillimmediatelydrainthetankregardlessofwatertemperature.
 Makesurethedrainoutletcanhandlewatertemperatureupto212ºFtopreventdamageorleaks.
GO BUTTON
• PressandholdtoclearblinkingServicelightaftererrorhasbeeneliminated(seeabove)
• PressandholdwiththeDrainbuttontoinitiateafail-safemanualdrainoverride
POWER LED
• Solidgreenlightindicatescorrectinstallation
• SolidgreenlightplusasolidredCallServiceLEDindicatesinstallationerror(seemanual)
HUMIDIFYING LED
• Solidgreenlightindicatestheunitishumidifying
• Nolightindicatesthatahumiditycallisnotpresent
CLEAN TANK LED
• Blinkingyellowlightindicatestheunitisdraining
• Solidyellowlightindicatesthatdrainingiscomplete,thetankisemptyandcanberemovedforcleaning
CALL SERVICE LED
• Solidredlightindicatesthatanerrorisfound
• PressandholdtheResetbutton,ablinkingredlightwillindicateaspecicerrorcode.Matchthenumber
 ofblinkstotheerrorcodeinthemanualtoidentifythemaintenanceneeded.Oncecomplete,pressand
 holdResettocleartheblinking.
PRESS RESET LED
• BlinkingyellowlightindicatesthatTrueSTEAMisinstand-bymodecheckingperformancestatus.This
 happenswhenpowerisappliedatinitialinstall,orafterthetankisreconnectedfollowingamanualcleaning.
 TrueSTEAMwillautomaticallyresetafter5minutesorpressandholdResetforimmediateoperation.
PRESS EMPTY LED
• Blinkingyellowlightindicatesthatcleaningisrequired.PressandholdtheEmptybuttontoinitiatethe
 drainingcycleforcleaning.
RESET BUTTON
• PressandholdtodetermineerrorcodewhenCallServicelightisblinking(seeabove)
• PressandholdtoclearblinkingCallServicelightaftererrorhasbeeneliminated(seeabove)
• Pressandholdtocanceldraining.
EMPTY BUTTON
• PressandholduntiltheCleanTankLEDstartsblinkingtoindictatethetankwillbegintheushingand
 drainingcycle
• CAUTION:TrueSTEAMwillbypasstheushingcycleiftheEmptybuttonispressedandheldduringthe
 drainingcycle.Thiswillimmediatelydrainthetankregardlessofwatertemperature.Makesurethedrain
 outletcanhandlewatertemperatureupto212ºFtopreventdamageorleaks.
TrueSTEAM Models
Date Code 0929 or Later
50-1336PM
July2009
©2009HoneywellInternationalInc.
TrueSTEAM Models
Date Code 0925 or Earlier
TolearnmoreaboutHoneywell’sTrueSTEAMHumidicationSystems,visitwww.forwardthinking.honeywell.com
counter matt.indd 1 7/13/09 11:35:04 AM