Filter
Top Products
Components Introduction
8
HOW TO USE REMOTE CONTROL UNIT
Install the battery
1
2
3
RESET button
Sliding cover
After replacement of batteries,
the LCD on the remote control
unit will display the status.
1. Press the two sides of the cover of the battery
component and slide it downward and remove.
2. Insert two AAA #7 Alkali batteries, and make sure
that,
The anode (+) and cathode (-) are properly placed.
Do not use Manganese batteries.
3. Press the Reset button with a pointed tool and then
replace the cover.
COMMONSENSE
Please make the remote control unit transmitter aim at the receiver of indoor unit.
There shouldn't have any obstacle between the remote control unit transmitter and the receiver of indoor unit.
Don't throw and break the remote control unit.
AA
T.SETTINGT.SETTING
C
A
A