HP (Hewlett-Packard) B6960-96008 Garage Door Opener User Manual


 
Integrating SAP DB/MaxDB and Data Protector
Restoring an SAP DB/MaxDB Database
Chapter 3290
Restoring an SAP DB/MaxDB Database
An SAP DB/MaxDB database can be restored using the Data Protector
GUI or CLI. An integrated restore is performed.
An SAP DB/MaxDB database can be either restored or migrated. Both
can be accomplished using any of the following methods:
The Data Protector GUI: see “Restoring Using the Data Protector
GUI” on page 295.
The Data Protector CLI: see “Restoring Using the Data Protector
CLI” on page 297.
The SAP DB/MaxDB utilities: see “Restoring Using SAP DB/MaxDB
Utilities” on page 299.
When performing an SAP DB/MaxDB migration using any of the above
methods, some additional tasks must first be done in order to prepare the
SAP DB/MaxDB Server or instance. These tasks are described in “SAP
DB/MaxDB Migration Prerequisites” on page 294.
Restore and Recovery Overview
This section provides an overview of restore and recovery process with
regard to Data Protector restore and recovery options selection. For a
detailed description of these options, see “SAP DB/MaxDB Restore and
Recovery Options” on page 304.
At the beginning of a restore session, Data Protector switches the
SAP DB/MaxDB database to the Admin mode. If the database cannot be
switched to the Admin mode, an error is issued in the Data Protector
monitor.
Depending on the type of restore and on the selected restore and recovery
options, the SAP DB/MaxDB database can be switched to the following
modes after the restore:
If the Data Protector Recovery option is selected, the database is
switched to the Online mode after the restore.