Filter
Top Products
Integrating SAP R/3 and Data Protector
Troubleshooting
Chapter 2218
b. If this fails, refer to the SAP R/3 Online Help to learn how to
execute backup and restore directly to disk using the SAP R/3
backup utility.
Check the error message and resolve these problems before you
continue.
4. Verify that the SAP R/3 backup tools correctly start backint
(which is provided by Data Protector):
Move the original backint and create a test script named backint.bat
in the directory where the SAP R/3 backup utility resides, with the
following entries:
echo "Test backint called as follows:"
echo "%0%1%2%3%4%5%6%7%8%9"
exit
Then start the following commands:
brbackup -t offline -d util_file -u <user>/<password> -c
If you receive backint arguments, this means that SAP R/3 is properly
configured for backup using backint; otherwise you have to reconfigure
SAP R/3.
See “Configuring an SAP R/3 Database Server” on page 167.
Configuration Problems
IMPORTANT The procedure described in the previous sections must be performed
before you start checking the Data Protector configuration.
1. Verify that the Data Protector software has been installed
properly.
Refer to the HP OpenView Storage Data Protector Installation and
Licensing Guide for details.