Filter
Top Products
Integrating SAP R/3 and Data Protector
Monitoring an SAP R/3 Backup and Restore
Chapter 2212
Monitoring an SAP R/3 Backup and Restore
The Data Protector GUI enables you to monitor current or previous
backup and restore sessions.
NOTE Only the Data Protector users in the Admin group and those granted the
Monitor user rights are given access to the Data Protector monitoring
functionality.
Monitoring is automatically activated when you start a restore or
backup.
Monitoring Current Sessions
During a backup, system messages are sent to both the SAP R/3
Database Server and the Data Protector monitor. Thus, you can monitor
a backup session from either the SAP R/3 Database Server or from any
Data Protector client in the network where the User Interface is
installed.
When it is detected that no more data can be backed up on the media,
either because they are not in a device or because they are full, and a
mount prompt is issued, the message is sent to the Data Protector
monitor only, not to SAP R/3. Change the media and confirm the mount
prompt in Data Protector.
To monitor a currently running session using the Data Protector GUI,
proceed as follows:
1. In the Context List, click Monitor.
In the Results Area, all currently running sessions are listed.
2. Double-click the session you want to monitor.
Clearing Sessions To remove all completed or aborted sessions from the Results Area of the
Monitor context, proceed as follows:
1. In the Scoping Pane, click Current Sessions.