Battery
Battery
Battery
© 2003 DESA Specialty Products™ 595-5611-05
Your doorbell includes (Product style of button and chime may vary from
illustrations):
• Doorbell chime
• Doorbell button/transmitter (model 6162 includes 2) w/battery
• Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime. In typical use,
alkaline batteries will last up to three years.
Chime
Volume
3. Before mounting, test the doorbell range.
Put the chime where you want to mount it
and temporarily place the doorbell button on
the doorjamb. Press the doorbell button.
2.Install the 3
alkaline "D"
batteries.
Make sure
the batteries
are oriented
properly.
Operation
Press the doorbell button to verify that the doorbell and chime work
properly. If the chime does not sound see the Troubleshooting guide on
page 4.
SL-6153/62/71/72
Wireless Doorbell
1.To open the chime case: press
in the catch on the bottom of the
chime and lift the case open.
4. Mount the doorbell button and chime.
Use either screws or double sided tape to
mount the doorbell button.
To mount with screws, remove the back of the
case by pushing in the tab on the bottom with
a small screwdriver.