Heath Zenith PF-4300-BK Home Safety Product User Manual


  Open as PDF
of 24
 
Questions or problems? Before returning to your
retailer, refer to the troubleshooting guide in this
manual or call our technical service department at
1-800-858-8501 (English speaking only), 7:30 am
to 4:30 pm, CST, Monday – Friday.
FEATURES
• Light comes on when motion is detected.
• Automatically turns light off.
• Half power Accent lighting.
• Photocell keeps the light off during daylight
hours.
PACKAGE CONTENTS
• Porch Light
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Nuts
• Lens Shield
REQUIREMENTS
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control must
be wired through a switch.
• Some electrical codes require installation by
a qualified electrician.
DualBrite
®
Diecast
Motion Sensing
Porch Light
© 2007 HeathCo LLC 598-1169-05
OPERATION
Note: When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
ON-TIME
TEST 1 5 10 MIN
TEST
Set ON-TIME switch to
1, 5, or 10 minutes.
AUTO
... back on.
1 Second OFF
then...
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1, 5,
or 10 position.
MANUAL MODE
ON-TIME
TEST 1 5 10 MIN
Before installation, record the model number
listed inside the fixture. Attach receipt in case
of possible warranty issues.
Model Number:
Set the ON-TIME switch
on the sensor to TEST.
Item Model
022246 PF-4300-BK
Meets the ENERGY STAR
®
guide-
lines when DualBrite
®
function
is off.
Mode: On-Time Works: Day Night
Test
5 Sec x x
Auto
1, 5, or 10 Min x
Manual
To Dawn* x
Accent
3, 6 Hr. to Dawn x
next