Heath Zenith 598-1109-05 Door User Manual


 
This package includes (Style of push button and chime may vary from illustration):
Wireless chime
Wireless push button w/battery
Hardware pack
This chime requires 4 “C” alkaline batteries (not included). In typical use,
alkaline batteries will last up to 2
1
/
2
years.
Wireless Mechanical
Battery Operated
Chime
© 2007 HeathCo LLC 598-1109-05
Figure 2
Figure 3
1. Install alkaline type A23 12 volt push button
battery (included). Remove back of case by
pushing in tab on bottom with a small screw-
driver. See diagram inside push button for correct
battery orientation.
2. Remove chime cover.
Pull firmly as shown in
Figure 2.
3. Install 4 alkaline “C” batteries in chime.
Make
sure batteries are oriented properly as shown in
Figure 3.
4. Test range.
Temporarily position chime and
push button where you want them mounted.
Press push button to verify chime and push
button work properly. If chime does not sound,
see Troubleshooting.
Figure 1
1 2 3 4 5 6 7
ON
1 2 3 4 5 6
7
ON
WARNING: To prevent possible SERIOUS
INJURY or DEATH:
NEVER allow small children near batteries.
If battery is swallowed, immediately notify
doctor.