Havis-Shields GSM33062 Fan User Manual


 
INSTALLATION INSTRUCTIONS KK-K9-F14-K
K9 TRANSPORTATION SYSTEM
2003-2009 EXPEDITION
TOOLS REQUIRED:
Power Drill
Drill Bit Set
Standard & Metric Socket Sets
Phillips Screw Driver
Open End Wrench Set
Wire Cutters / Crimping tool
Ratcheting Wrench Extension
Torx Bit Set
4 ½” Hole Saw (Exhaust Fan Option)
Caulk Gun
HARDWARE:
QTY: DESCRIPTION: PART #:
28 ¼” x ½” Stainless carriage bolts GSM32022
8 ¼” x ¾” Stainless carriage bolts GSM32024
64 ¼” flanged serrated nuts GSM30023
6 ¼” x ¾” Hex head cap screw GSM33001
6 ¼” x 1 ½” Hex head lag screw GSM33062
36 #12 x ¾” Stainless sheet metal screws GSM34177
24 #10 x ¾” Stainless sheet metal screws GSM34170
12 #10 x ½” Stainless sheet metal screws GSM34169
10 #10 x ¾” Stainless machine screws GSM34098
6 #10 x ¾” Sheet metal screws GSM33195
1 Tube silver caulk PRM97343
1 46” x 45 ½” Rubber Floor mat KNM01029-SUV
10 #10 x ½” Flat head sheet metal screws GSM33150
Always!
¾ Read all instructions before installing any Havis-Shields Equipment Corp products.
¾ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
¾ Use hardware provided with install kit
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html, email technicalsupport@havis.com or call 1-800-
524-9900.