Filter
Top Products
Starck X Wall-Mount Faucet
10074001
Available in Chrome
55°
G ½
Product Specification
Flow rate 2.2 gpm
Maximum water pressure 145 psi
Recommended water pressure 14.5 - 75 psi
Recommended hot water temp 120
o
F - 140
o
F*
No separate rough-in required: install 2 female threaded fittings, spaced 3 1/8” apart (on
center), recessed 3/8” behind surface of finished wall for the hot and cold water supplies.
No drain included - consult the manufacturer of the sink for their recommendations regarding
suitable drains.
Know and follow all applicable local plumbing codes regarding the required air gap between the end of the spout and the flood level of the
lavatory.
*Many municipalities require that the water heater be set no higher than 120
o
. Please know and follow all applicable plumbing codes
when setting the temperature on the water heater.