Filter
Top Products
T25227 (Mfg. since 09/13) -5-
SECTION 2: INTRODUCTION
We are proud to offer this manual with your
new oscillating multi-tool! We've made
every effort to be exact with the instruc-
tions, specifications, drawings, and pho-
tographs of the multi-tool when writing
this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous
improvement, your multi-tool may not
exactly match the manual. If you find this
to be the case, and the difference between
the manual and multi-tool leaves you in
doubt, check our website for the latest
manual update or call technical support
for help.
For your convenience, we post all avail-
able manuals and manual updates for free
on our website at www.grizzly.com. Any
updates to your model of machine will be
reflected in these documents as soon as
they are complete.
Foreword
Power Requirement .....................................................................120V, Single-Phase, 60 Hz
Full Load Current Rating .................................................................................................1.8A
Sanding Pad Size .............................................................................................................3
5
⁄8"
Oscillations per Minute ..........................................................................15,000–22,000 OPM
Specifications
Contact Info
We stand behind our machines. If you
have any service questions, parts requests
or general questions about the machine,
please call or write us at the location listed
below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
E-Mail: techsupport@grizzly.com
We want your feedback on this manual.
If you can take the time, please email or
write to us at the address below and tell
us how we did:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com