Open as PDF
T25227 (Mfg. since 09/13)-14-
SECTION 6: MAINTENANCE
Always DISCONNECT POWER
before servicing, adjusting, or doing
maintenance to reduce the risk of
accidental injury or electrocution.
Never submerge tool in liquid or
clean with flammable solvents.
Electrocution or fire may result,
causing serious injury or death.
Cleaning the Model T25227 is relatively
easy and should be done daily to prevent
build up of dust and resins.
Use an air hose or vacuum to remove
excess wood chips and dust from the ven-
tilation openings (see Figure 15).
Use a dry rag to wipe off the remaining
dust and debris from the tool flange and
any accessories used.
For optimum performance from your multi-
tool, follow this maintenance schedule and
refer to any specific instructions given in
• Loose mounting bolts.
• Worn switch.
• Worn or damaged cord.
• Any other unsafe condition.
Figure 15. Ventilation opening.