Filter
Top Products
Fire, Explosion, and Electric Shock Hazard
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous
condition and resulting fire or explosion and serious injury.
• Ground the equipment.
• Proper grounding dissipates static electricity generated in the equipment.
• This equipment is not intended for intrinsically safe areas.
• Keep the dispense area free of debris, including solvent, rags, and gasoline.
• If there is any static sparking or you feel an electric shock while using the equipment,
stop operating immediately. Do not use the equipment until you have identified and
corrected the problem.
• Make sure all electrical work is performed only by a qualified electrician.
• Have any checks, installation or service to electrical equipment performed by a
qualified electrician only.
• Make sure all electrical equipment is installed and operated in compliance with local
and applicable codes.
• Make sure power is disconnected when servicing and repairing equipment.
• Keep liquids away from the electrical components.
• Disconnect electrical power at the main switch before servicing the equipment.
• Never exceed maximum wattage of the supply unit.
4 309004