Filter
Top Products
LZ-350 Bracket
Typical mounting on IN-SWINGING door
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianniindustries, inc.All rightsreserved.
DM-CA-LZ-350 Ver.C Published on2008.05.27
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
&
62
57
42
270
29
270
48
270
54
5
30
Minimal:54mm
L-Bracket
Z-Bracket
In-Swinging
Frame
Door
Armature
Application for the Electromagnet:
EM-350 Series
Unit:mm
Installation Steps of LZ bracket for In-swinging doors
2
Tighten the electromagnetic lock
on the Lbracket by using the
fixing screw.
1
Find a mounting location onthe
door frame for the Lbracket. Make
sure that thedoor is still closeable.
6
Close the door.Measure thecorrect
position bybringing the armature
plate closeto the contactsurface of
the electromagneticlock.
7
Turn on thepower of EM-Lock,
and letthe armature platebonds
to theEM-lock.Adjust the position
between theZ bracket and the
door frame.
Finish
Once theposition is correct,
use thescrews to permanently
mount theZ bracket on the door
frame.
Closing thecover on bracket.
4
Insert theguide pins intothe
armature plate.Put one rubber
washer betweenarmature plate
and theZ bracket.
5
3
Assemble theZ bracket, andmake
sure thatthe Z bracket is adjustable.
Power
No. 13,Zhong Sing Road,Tu-Cheng Industrial Zone,
Tu-Cheng City,Taipei, Taiwan 23678
Tel: 886-22267 7986 /Fax: 886-2 22679876
E-Mail: info@gianni.com.tw
Website: gianni.tw