Filter
Top Products
L-NH350M Bracket
Typical mounting on OUT-SWINGINGnarrow frame door
GIANNI INDUSTRIES, INC.
Copyright 2008Gianniindustries, inc.Allrights reserved.
DM-CA-L-NH350M Ver.A Publishedon 2008.06.16
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomer satisfaction.
&
Unit:mm
Application for the Electromagnet:
EM-NH350 Series
Magnet
Door
Frame
Door
Leaf
A
Out-swinging
"L" brackets
1
4
2
5
3
6
Drill an 8 mm hole
through door, from
sexnut bolt side only,
enlarge the 8mm hole to
16mm.
Drill an 6.8 mm dia.
Hole and tap for
M8x12.5thread.
Drill an 8 mm hole thru
door from sexnut bolt
side of door, drill
12.7mmhole, 36mm in
depth.
Fold the mounting template along
the dotted line to a 90-degree angle.
Close the door, place the template
against the door and frame.
Drill three holes in the door as
indicated onthe template.
Turn on the power of EM-Lock, and
let the armature plate bonds to the
EM-lock. Adjust the position
between the L bracket and the
door frame.
Once the position is correct, use the
screws to permanently mount the L
bracket on the door frame.
Test the unit. Insert the anti-
tamper caps into the mounting
screw accessholes.
16mm8mm
Hollow MetalDoor
6.8mm for M8-1.25 thread
Reinforced Door
12.7mm8mm
Solid Door
36mm
Power Power
Finish
L-150, L-EM150...
L-300,L-10001ST...
L-750, L-350,L-400...
L-500,L-600...
38mm
42mm
48mm
60mm
300 LBS
Magnet Grade Option Brackets
600 LBS
800LBS
1200 LBS
ValueA"
The A value in the table below for each bracket to
mount on the door frame, shows the minimum
requirement width of the door frame for different
electromagnetic lock model.
Lock the armature plate and L
bracket first. Put the electromagnet
into thearmature plate second.
35.5
52
6.5
55.5
29
29
265
265
265
No. 13,Zhong Sing Road,Tu-Cheng Industrial Zone,
Tu-Cheng City,Taipei, Taiwan 23678
Tel: 886-22267 7986 /Fax: 886-2 22679876
E-Mail: info@gianni.com.tw
Website: gianni.tw